Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 7 Nov 2013 10:36:20 +0100
From:      Polytropon <freebsd@edvax.de>
To:        <mongkonwit_phu@winner.co.th>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: i have some problem
Message-ID:  <20131107103620.7b18f934.freebsd@edvax.de>
In-Reply-To: <20131107072833.d3a0d2ef@mail.winner.co.th>
References:  <20131107072833.d3a0d2ef@mail.winner.co.th>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Thu, 07 Nov 2013 14:28:33 +0700, mongkonwit_phu@winner.co.th wrote:
> we use smartctl -a /dev/da0
> but can not check HDD so i would like to know about problem.
> 
> Detail of smartctl 6.0
> [...]
> Device does not support SMART
> 
> Error Counter logging not supported
> Device does not support Self Test logging

The answer is right here: The device you're querying does not
have S.M.A.R.T. support. The reason might be:

> we use raid card is pile 2008 setup raid 10

The disk device da0 is part of a RAID configuration, it does
not directly correspond to a disk. Only a "physical disk" can
be addressed with smartctl.

Your options:

1. Make the PIKE 2008 controller "hand the disk through", removing
   it from the RAID configuration.

2. Attach the disk to a direct connection.

You won't be able to run smartctl diagnostics otherwise as this
requires a "more direct access" than the RAID controller can offer.


-- 
Polytropon
Magdeburg, Germany
Happy FreeBSD user since 4.0
Andra moi ennepe, Mousa, ...



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?20131107103620.7b18f934.freebsd>