Date: Sat, 1 May 2004 14:04:55 +0200 From: FreeBsdBeni <beni.brinckman@advalvas.be> To: freebsd-questions@freebsd.org Subject: cdrecord error or bad media ? Message-ID: <200405011404.59129.beni.brinckman@advalvas.be>
next in thread | raw e-mail | index | archive | help
=2D----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, System : 5.2.1-Release-p5 mkisofs : 2.0.3 cdrecord : 2.00.3 I'm trying to burn an iso onto a cd-rw. First made the iso with : mkisofs -r -o beni.iso -T -J /home/beni/cds/ without any error messages. Then wanted to put the beni.iso file onto an blanked cd-rw with : cdrecord -v dev=3D4,0,0 beni.iso speed=3D24 -data and that gave me the following output, but writes nothing useful on the cd.= =2E. What goes wrong ? Is it my cd-rw media (tried it with another cd with same= =20 result...), is it cdrecord or is something else wrong ? Cdrecord 2.00.3 (i386-unknown-freebsd5.2.1) Copyright (C) 1995-2002 J=C3=B6= rg=20 Schilling TOC Type: 1 =3D CD-ROM scsidev: '4,0,0' scsibus: 4 target: 0 lun: 0 Using libscg version 'schily-0.7' atapi: 0 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD RW DVR-107D' Revision : '1.05' Device seems to be: Generic mmc2 DVD-R/DVD-RW. cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support co= de. cdrecord: If you need DVD-R/DVD-RW support, ask the Author for=20 cdrecord-ProDVD. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1267712 =3D 1238 KB =46IFO size : 4194304 =3D 4096 KB Track 01: data 576 MB Total size: 662 MB (65:37.52) =3D 295314 sectors Lout start: 662 MB (65:39/39) =3D 295314 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11650 (97:26/50) ATIP start of lead out: 337050 (74:56/00) 1T speed low: 0 (reserved val 0) 1T speed high: 4 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 10) power mult factor: 4 6 recommended erase/write power: 3 A1 values: 02 4C B0 A2 values: 5A C8 38 Disk type: Phase change Manuf. index: 10 Manufacturer: Lead Data Inc. Blocks total: 337050 Blocks current: 337050 Blocks remaining: 41736 RBlocks total: 351205 RBlocks current: 351205 RBlocks remaining: 55891 Starting to write CD/DVD at speed 4 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Performing OPC... Starting new track at sector: 0 Track 01: 0 of 576 MB written.cdrecord: Input/output error. write_g1: s= csi=20 sendcmd: retryable error CDB: 2A 00 00 00 01 55 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00= 00=20 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s write track data: error after 698368 bytes Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00 Writing time: 15.535s Average write speed 757.6x. =46ixating... =46ixating time: 80.349s cdrecord: fifo had 75 puts and 12 gets. cdrecord: fifo was 0 times empty and 4 times full, min fill was 95%. su-2.05b# =2D----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (FreeBSD) iD8DBQFAk5JrN6gIF8UWpu0RAkW5AJ42jq6vOfxMAIJjzhX3zMSRmFEpeACeP5Vz v4uc0ESVNe+n8/ayEcIPL8E=3D =3Dj870 =2D----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200405011404.59129.beni.brinckman>