From owner-freebsd-arm@FreeBSD.ORG Sun Apr 6 19:42:50 2014 Return-Path: Delivered-To: freebsd-arm@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 75563F25; Sun, 6 Apr 2014 19:42:50 +0000 (UTC) Received: from smtp.fgznet.ch (mail.fgznet.ch [81.92.96.47]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id F289230C; Sun, 6 Apr 2014 19:42:49 +0000 (UTC) Received: from deuterium.andreas.nets (dhclient-91-190-14-19.flashcable.ch [91.190.14.19]) by smtp.fgznet.ch (8.13.8/8.13.8/Submit_SMTPAUTH) with ESMTP id s36JgKJj047684; Sun, 6 Apr 2014 21:42:34 +0200 (CEST) (envelope-from andreast-list@fgznet.ch) Message-ID: <5341AE1C.4040207@fgznet.ch> Date: Sun, 06 Apr 2014 21:42:20 +0200 From: Andreas Tobler User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Thunderbird/24.3.0 MIME-Version: 1.0 To: Ian Lepore Subject: Re: MARVELL BOARD: RD-88F6281A -CURRENT References: <53406D94.5020605@fgznet.ch> <1396732234.81853.334.camel@revolution.hippie.lan> <53407B53.4040807@fgznet.ch> <1396737091.81853.339.camel@revolution.hippie.lan> In-Reply-To: <1396737091.81853.339.camel@revolution.hippie.lan> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Scanned-By: MIMEDefang 2.64 on 81.92.96.47 Cc: "'freebsd-arm@freebsd.org'" X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: "Porting FreeBSD to ARM processors." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 06 Apr 2014 19:42:50 -0000 On 06.04.14 00:31, Ian Lepore wrote: > On Sat, 2014-04-05 at 23:53 +0200, Andreas Tobler wrote: >> On 05.04.14 23:10, Ian Lepore wrote: >>> On Sat, 2014-04-05 at 22:54 +0200, Andreas Tobler wrote: >>>> Hi all, >>>> >>>> I'm very new to arm hardware, but not to FreeBSD. >>>> I got my hands on a broken (software like) ix2-200 Iomega StorCenter. A >>>> few wires and a screen session allowed me to dive into it and I tried to >>>> boot -CURRENT on it. Below where I end. >>>> >>>> The config I used is the DB-88F6XXX with enabling the INVARIANTS etc. >>>> The board itself identifies as the subject says. It has this: >>>> Soc: 88F6281 A0CPU running @ 1000Mhz L2 running @ 333Mhz >>>> SysClock = 333Mhz , TClock = 200Mhz >>>> DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 >>>> DRAM CS[0] base 0x00000000 size 256 >>>> >>>> Has anyone a hint or an idea where to start debugging this? >>>> >>>> TIA, >>>> Andreas >>>> >>>> [...] >>> >>> Easy things first, I guess... in sys/boot/fdt/dts/db88f6281.dts I see >>> >>> reg = <0x0 0x20000000>; // 512M at 0x0 >>> >>> Try cutting that in half and rebuilding the kernel. >> >> Yep, simple thing! As said, new to the hardware :) >> >> Thanks a lot. >> >> Sure, now I 'hang' in an other area. >> >> mge0: mem 0x72000-0x73fff irq >> 12,13,14,11,46 on simplebus0 >> mge0: Ethernet address: 00:d0:b8:1e:3b:df >> mge0: attaching PHYs failed >> --> hangs >> According to the u-boot env I have two eth's and only the second is >> wired and used. >> >> From u-boot: >> Net: egiga0, egiga1 [PRIME] >> >> Now my questions, how do I enable verbose boot? On PowerPC I know I have >> to do it in boot/loader.conf, here too? >> >> I guess my hardware is different from an eval board, so I expect I'd >> need a customized dts, no? If so, how do I get the information out of >> the u-boot? >> Again, thx a lot! >> Andreas > > You're probably not even using loader(8) but rather launching the kernel > directly (only newer arm systems and newer versions of u-boot use > loader). That means things like tunables and bootverbose have to be > hacked into the kernel, at least for now to make some progress. The > initarm_early_init() routine in arm/mv/mv_machdep.c is a good place to > throw in a bootverbose=1. Ok. I did it in sys/kern/init_main.c > For disabling egiga0 just add status="disabled" to its entry in the dts > file. Have a look at the dreamplug dts files for an example of setting > up egiga1, but I'm not sure everything will be exactly the same. You > may need to transplant the phy0 entry from egiga0 into egiga1 for that > box. Good start, thanks. > The 'bdinfo' command in u-boot sometimes shows lots of good info, > sometimes not so much. Hm, this command is not available in my env. Anyway, I figured to play with the regs in the enet dts section and I managed to get it up. Unfortunately I don't get any dhcp requests to the server, so no ack can be given. I'll play around. Sending DHCP Discover packet from interface mge0 (00:d0:b8:1e:3b:df) .... DHCP/BOOTP timeout for server 255.255.255.255 .... Thanks again! Andreas