Date: Wed, 10 Nov 2004 22:54:15 +0100 From: Sebastian Holmqvist <sebastian.holmqvist@gmail.com> To: freebsd-questions@freebsd.org Subject: Re: FBSD 2.5.1-p11 | Promise SATA150 TX2plus | Seagate B 200GB - BAD SUPERBLK / Machine freezes up etc Message-ID: <52aaba240411101354402c4c86@mail.gmail.com> In-Reply-To: <20041110214013.GE39219@keyslapper.org> References: <20041108184256.GB21655@keyslapper.org> <20041108192517.GC21655@keyslapper.org> <52aaba24041108120450dbf5d1@mail.gmail.com> <52aaba2404111010133dbd0d5f@mail.gmail.com> <20041110182518.GB39219@keyslapper.org> <52aaba2404111010297570f1a3@mail.gmail.com> <20041110191839.GD39219@keyslapper.org> <52aaba24041110114261444559@mail.gmail.com> <52aaba2404111013296a372453@mail.gmail.com> <20041110214013.GE39219@keyslapper.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 10 Nov 2004 16:40:13 -0500, Louis LeBlanc <freebsd@keyslapper.org> wrote: > On 11/10/04 10:29 PM, Sebastian Holmqvist sat at the `puter and typed: > > > <SNIP> > > > > Hey, I found this just now, might be something? > > http://lists.freebsd.org/pipermail/freebsd-bugs/2003-August/002921.html >=20 > Not sure if this has been addressed yet. Looks like it was encountered > in August, so I'd think so by now. >=20 > Anyone else? >=20 > Are you sure this is the one you're seeing? It's not the same thing I > was getting. >=20 > Lou > -- > Louis LeBlanc FreeBSD@keyslapper.org > Fully Funded Hobbyist, KeySlapper Extrordinaire :) > http://www.keyslapper.org =D4=BF=D4=AC >=20 > The economy depends about as much on economists as the weather does on > weather forecasters. > -- Jean-Paul Kauffmann >=20 >=20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" >=20 I don't get anything but a freeze. But I'm looking up atacontrol(8) right now, maybe look into which mode I'm running. And ata(4) states as follows:=20 ATAPI devices are set to PIO mode by default because severe DMA problems are common even if the device capabilities indicate support. You can always try to set DMA mode on an ATAPI device using atacontrol(8), but= be aware that your hardware might not support it and can potentially hang the entire system causing data loss. --=20 Sebastian Holmqvist Webprogrammer / HL2 modder http://cae.hl2files.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52aaba240411101354402c4c86>