Date: Wed, 16 Jun 2010 21:57:00 +0400 From: Artem Kim <artem_kim@inbox.ru> To: freebsd-stable@freebsd.org, pyunyh@gmail.com Cc: yongari@freebsd.org Subject: Re: Problems with bge (possibly related to r208993) Message-ID: <201006162157.00522.artem_kim@inbox.ru> In-Reply-To: <20100616000500.GN4257@michelle.cdnetworks.com> References: <201006131934.11389.artem_kim@inbox.ru> <201006160350.39502.artem_kim@inbox.ru> <20100616000500.GN4257@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary-00=_sBRGM6JwsDPp7Zd
Content-Type: Text/Plain;
charset="iso-8859-15"
Content-Transfer-Encoding: 7bit
On Wednesday 16 June 2010 04:05:00 Pyun YongHyeon wrote:
> On Wed, Jun 16, 2010 at 03:50:39AM +0400, Artem Kim wrote:
> > On Wednesday 16 June 2010 03:21:09 Pyun YongHyeon wrote:
> > > Hmm, why you need link0 flag? The link0 flag is used to force the
> > > interface MASTER. Normally this configuration is automatically
> > > done during auto-negotiation such that one is configured as MASTER
> > > and the other is configured as SLAVE. If you manually configure
> > > this setting you should be very careful not to use the same
> > > configuration of MASTER/SLAVE of link partner. If you have to use
> > > link0 option, the link partner should be configured to use SLAVE.
> > > Normally you should always use auto-negotiation on 1000baseT unless
> > > link partner is severely broken to support NWAY.
> > >
> > > It seems link partner does not agree on resolved speed/duplex
> > > configuration of bge1. Check link partner's resolved link
> > > configuration.
> >
> > In any case, now I do not use the flag link0.
> > Now the master/slave is assigned through auto-negotiation.
> >
> > link0 not been set before the problem occurred. I reset link0 flag on
> > NAS2 when I got a problem the first time.
> >
> > Now x900 port1.0.12 and bge0 configured automatically.
> >
> > >bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
> > > 1500 media: Ethernet autoselect (1000baseT <full-duplex>)
> > > status: active
> > >
> > >awplus>show int port1.0.12 status
> > >Port Name Status Vlan Duplex Speed Type
> > >port1.0.12 connected 55 a-full a-1000
> > > 1000BASE-T
>
> Would you try attached patch and let me know what you can see on
> your console? The patch will display error code on console. Note,
> it may spam your console a lot if you see many RX errors so please
> don't apply it on your production server.
>
I applied the patch, but I can not reproduce the problem with "synthetic"
tests. As a load I used netperf, but I have not seen errors in the console.
The test lasted about 14 hours.
statistics:
nas2# netstat -hndI bge1 1
input (bge1) output
packets errs idrops bytes packets errs bytes colls drops
112K 24 0 109M 95K 0 65M 0 0
118K 0 0 96M 117K 0 103M 0 0
119K 0 0 98M 118K 0 104M 0 0
nas2# netstat -hndI bge1
Name Mtu Network Address Ipkts Ierrs Idrop Opkts
Oerrs Coll Drop
bge1 1500 <Link#3> 00:1b:78:a3:3c:01 1.8G 133K 0 1.4G
0 0 10M
bge1 1500 79.142.106.12 79.142.106.133 1.8G - - 1.4G
- - -
But the problem is reproduced with real users. I going to try more tests with
NAT.
--Boundary-00=_sBRGM6JwsDPp7Zd
Content-Type: text/plain;
charset="KOI8-R";
name="nas2_dmeseg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="nas2_dmeseg.txt"
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-PRERELEASE #0: Wed Jun 16 00:26:15 UTC 2010
Arti@nas2.my.my:/usr/obj/usr/src/sys/router i386
Preloaded elf kernel "/boot/kernel/kernel" at 0x80a35000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2992519332 Hz
CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (2992.52-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Family = 6 Model = f Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line
real memory = 1073741824 (1024 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000003ecc8fff, 1040855040 bytes (254115 pages)
avail memory = 1039032320 (990 MB)
Table 'FACP' at 0x3ff20e24
Table 'SPMI' at 0x3ff20e98
Table 'APIC' at 0x3ff20ed8
APIC: Found table at 0x3ff20ed8
MP Configuration Table version 1.4 found at 0x8009bc71
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
x86bios: IVT 0x000000-0x0004ff at 0x80000000
x86bios: SSEG 0x010000-0x01ffff at 0x83fe9000
x86bios: EBDA 0x09b000-0x09ffff at 0x8009b000
x86bios: ROM 0x0a0000-0x0effff at 0x800a0000
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
bios32: Found BIOS32 Service Directory header at 0x800f7100
bios32: Entry = 0xfd361 (800fd361) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd360+0x425
pnpbios: Found PnP BIOS data at 0x800f7180
pnpbios: Entry = f0000:be77 Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf7130 00014 (v0 PTLTD )
ACPI: RSDT 0x3ff1cbb0 00040 (v1 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 0x3ff20e24 00074 (v1 HP Trek 06040000 PTL 00000003)
ACPI: DSDT 0x3ff1d29c 03B88 (v1 HP Trek 06040000 MSFT 0100000B)
ACPI: FACS 0x3ff21fc0 00040
ACPI: SPMI 0x3ff20e98 00040 (v5 HP Blakford 06040000 PTL 00000001)
ACPI: APIC 0x3ff20ed8 00074 (v1 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 0x3ff20f4c 0003C (v1 PTLTD MCFG 06040000 LTP 00000000)
ACPI: BOOT 0x3ff20f88 00028 (v1 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SPCR 0x3ff20fb0 00050 (v1 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: SSDT 0x3ff1cbf0 006AC (v1 DpgPmm CpuPm 00000012 INTL 20030224)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec80000
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
pcibios: BIOS version 2.10
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0x83cb2000 pa 0x1000
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.REGS -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRX -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRY -> bus 0 dev 31 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 10 11 14 15
Validation 0 7 N 0 3 4 5 6 7 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 5 6 7 10 11 14 15
Validation 0 255 N 0 4 5 6 7 10 11 14 15
After Disable 0 255 N 0 4 5 6 7 10 11 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 4 5 6 7 10 11 14 15
Validation 0 5 N 0 4 5 6 7 10 11 14 15
After Disable 0 255 N 0 4 5 6 7 10 11 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x25c0, revid=0x31
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25f7, revid=0x31
domain=0, bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e3, revid=0x31
domain=0, bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25fa, revid=0x31
domain=0, bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e5, revid=0x31
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e6, revid=0x31
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e7, revid=0x31
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25f0, revid=0x31
domain=0, bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x31
domain=0, bus=0, slot=16, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x31
domain=0, bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f1, revid=0x31
domain=0, bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f3, revid=0x31
domain=0, bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f5, revid=0x31
domain=0, bus=0, slot=21, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f6, revid=0x31
domain=0, bus=0, slot=22, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2690, revid=0x09
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2692, revid=0x09
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2688, revid=0x09
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x1800, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
found-> vendor=0x8086, dev=0x2689, revid=0x09
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 23
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
found-> vendor=0x8086, dev=0x268a, revid=0x09
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 23
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
found-> vendor=0x8086, dev=0x268c, revid=0x09
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdc000000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdc000000
ehci early: SMM active, request owner change
ehci early: SMM does not respond
found-> vendor=0x8086, dev=0x244e, revid=0xd9
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0f (3750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2670, revid=0x09
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x269e, revid=0x09
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type I/O Port, range 32, base 0x1860, size 4, enabled
found-> vendor=0x8086, dev=0x2680, revid=0x09
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x1890, size 3, enabled
map[14]: type I/O Port, range 32, base 0x1884, size 2, enabled
map[18]: type I/O Port, range 32, base 0x1888, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x1880, size 2, enabled
map[20]: type I/O Port, range 32, base 0x1870, size 4, enabled
map[24]: type Memory, range 32, base 0xdc000400, size 10, memory disabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x269b, revid=0x09
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 7
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xdc100000-0xdc1fffff
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x8086, dev=0x3500, revid=0x01
domain=0, bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x350c, revid=0x01
domain=0, bus=1, slot=0, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 3
pcib2: I/O decode 0xf000-0xfff
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x8086, dev=0x3510, revid=0x01
domain=0, bus=2, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0047, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pcib4: domain 0
pcib4: secondary bus 7
pcib4: subordinate bus 7
pcib4: I/O decode 0xf000-0xfff
pcib4: no prefetched decode
pci7: <ACPI PCI bus> on pcib4
pci7: domain=0, physical bus=7
pcib5: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib5: domain 0
pcib5: secondary bus 8
pcib5: subordinate bus 8
pcib5: I/O decode 0xf000-0xfff
pcib5: no prefetched decode
pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P3 - AE_NOT_FOUND
pci8: <ACPI PCI bus> on pcib5
pci8: domain=0, physical bus=8
pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib6: domain 0
pcib6: secondary bus 12
pcib6: subordinate bus 12
pcib6: I/O decode 0x2000-0x2fff
pcib6: memory decode 0xdc200000-0xdc2fffff
pcib6: no prefetched decode
pci12: <ACPI PCI bus> on pcib6
pci12: domain=0, physical bus=12
found-> vendor=0x8086, dev=0x10b9, revid=0x06
domain=0, bus=12, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xdc220000, size 17, enabled
pcib6: requested memory range 0xdc220000-0xdc23ffff: good
map[14]: type Memory, range 32, base 0xdc200000, size 17, enabled
pcib6: requested memory range 0xdc200000-0xdc21ffff: good
map[18]: type I/O Port, range 32, base 0x2000, size 5, enabled
pcib6: requested I/O range 0x2000-0x201f: in range
pcib6: matched entry for 12.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x2000-0x201f mem 0xdc220000-0xdc23ffff,0xdc200000-0xdc21ffff irq 16 at device 0.0 on pci12
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdc220000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:1b:21:27:12:58
pcib7: <PCI-PCI bridge> at device 5.0 on pci0
pcib7: domain 0
pcib7: secondary bus 13
pcib7: subordinate bus 13
pcib7: I/O decode 0xf000-0xfff
pcib7: no prefetched decode
pci13: <PCI bus> on pcib7
pci13: domain=0, physical bus=13
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib8: domain 0
pcib8: secondary bus 14
pcib8: subordinate bus 14
pcib8: I/O decode 0xf000-0xfff
pcib8: no prefetched decode
pci14: <ACPI PCI bus> on pcib8
pci14: domain=0, physical bus=14
pcib9: <PCI-PCI bridge> at device 7.0 on pci0
pcib9: domain 0
pcib9: secondary bus 15
pcib9: subordinate bus 15
pcib9: I/O decode 0xf000-0xfff
pcib9: no prefetched decode
pci15: <PCI bus> on pcib9
pci15: domain=0, physical bus=15
pcib10: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib10: domain 0
pcib10: secondary bus 19
pcib10: subordinate bus 19
pcib10: I/O decode 0xf000-0xfff
pcib10: memory decode 0xdc300000-0xdc3fffff
pcib10: no prefetched decode
pci19: <ACPI PCI bus> on pcib10
pci19: domain=0, physical bus=19
found-> vendor=0x14e4, dev=0x1659, revid=0x11
domain=0, bus=19, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xdc300000, size 16, enabled
pcib10: requested memory range 0xdc300000-0xdc30ffff: good
pcib10: matched entry for 19.0.INTA
pcib10: slot 0 INTA hardwired to IRQ 16
pci0:19:0:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem 0xdc300000-0xdc30ffff irq 16 at device 0.0 on pci19
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdc300000
bge0: adjust device control 0x2000 -> 0x5000
bge0: CHIP ID 0x00004101; ASIC REV 0x04; CHIP REV 0x41; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0018, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:1b:78:a3:3c:00
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50
bge0: [MPSAFE]
bge0: [ITHREAD]
pcib11: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib11: domain 0
pcib11: secondary bus 20
pcib11: subordinate bus 20
pcib11: I/O decode 0xf000-0xfff
pcib11: memory decode 0xdc400000-0xdc4fffff
pcib11: no prefetched decode
pci20: <ACPI PCI bus> on pcib11
pci20: domain=0, physical bus=20
found-> vendor=0x14e4, dev=0x1659, revid=0x11
domain=0, bus=20, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xdc400000, size 16, enabled
pcib11: requested memory range 0xdc400000-0xdc40ffff: good
pcib11: matched entry for 20.0.INTA
pcib11: slot 0 INTA hardwired to IRQ 17
pci0:20:0:0: bad VPD cksum, remain 14
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem 0xdc400000-0xdc40ffff irq 17 at device 0.0 on pci20
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdc400000
bge1: adjust device control 0x2000 -> 0x5000
bge1: CHIP ID 0x00004101; ASIC REV 0x04; CHIP REV 0x41; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0018, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:1b:78:a3:3c:01
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51
bge1: [MPSAFE]
bge1: [ITHREAD]
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1800-0x181f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
uhci0: [MPSAFE]
uhci0: [ITHREAD]
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1820-0x183f irq 23 at device 29.1 on pci0
uhci1: [MPSAFE]
uhci1: [ITHREAD]
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1840-0x185f irq 23 at device 29.2 on pci0
uhci2: [MPSAFE]
uhci2: [ITHREAD]
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xdc000000-0xdc0003ff irq 23 at device 29.7 on pci0
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: waiting for BIOS to give up control
usbus3: timed out waiting for BIOS
usbus3: EHCI version 1.0
usbus3: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib12: domain 0
pcib12: secondary bus 21
pcib12: subordinate bus 21
pcib12: I/O decode 0xf000-0xfff
pcib12: memory decode 0xdc500000-0xdcffffff
pcib12: prefetched decode 0xde000000-0xdeffffff
pcib12: Subtractively decoded bridge.
pci21: <ACPI PCI bus> on pcib12
pci21: domain=0, physical bus=21
found-> vendor=0x102b, dev=0x0522, revid=0x02
domain=0, bus=21, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xde000000, size 24, enabled
pcib12: requested memory range 0xde000000-0xdeffffff: good
map[14]: type Memory, range 32, base 0xdc500000, size 14, enabled
pcib12: requested memory range 0xdc500000-0xdc503fff: good
map[18]: type Memory, range 32, base 0xdc800000, size 23, enabled
pcib12: requested memory range 0xdc800000-0xdcffffff: good
pcib12: matched entry for 21.2.INTA
pcib12: slot 2 INTA hardwired to IRQ 17
vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdc500000-0xdc503fff,0xdc800000-0xdcffffff irq 17 at device 2.0 on pci21
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=04 ostat1=00
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x08 err=0x08 lsb=0x08 msb=0x08
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 53
ata0: [MPSAFE]
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x1890-0x1897,0x1884-0x1887,0x1888-0x188f,0x1880-0x1883,0x1870-0x187f mem 0xdc000400-0xdc0007ff irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1870
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
atapci1: [MPSAFE]
atapci1: [ITHREAD]
pci0: child atapci1 requested type 4 for rid 0x24, but the BAR says it is an memio
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1890
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1884
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1888
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1880
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 55
uart0: [FILTER]
uart0: fast interrupt
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xdc000-0xdffff pnpid ORM0000 on isa0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata1 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 166251079 Hz
Timecounter "TSC" frequency 2992519332 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
ipfw2 initialized, divert loadable, nat loadable, rule-based forwarding enabled, default to deny, logging disabled
ipfw0: bpf attached
lo0: bpf attached
ata0: Identifying devices: 00000000
ata0: New devices: 00000000
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: setting UDMA100
ad4: 76319MB <Seagate ST3808110AS 3.AJL> at ata2-master UDMA100 SATA
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 51
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
ct_to_ts([2010-06-16 00:38:25]) = 1276648705.000000000
start_init: trying /sbin/init
ugen2.2: <ServerEngines> at usbus2
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus2
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus2
ums0: 8 buttons and [XYZ] coordinates ID=0
lo1: bpf attached
vlan10: bpf attached
vlan102: bpf attached
vlan104: bpf attached
vlan105: bpf attached
vlan106: bpf attached
vlan107: bpf attached
vlan108: bpf attached
vlan109: bpf attached
vlan110: bpf attached
vlan111: bpf attached
vlan112: bpf attached
vlan113: bpf attached
vlan114: bpf attached
vlan115: bpf attached
vlan116: bpf attached
bge1:
bge1: link state changed to UP
link UP
bge0:
bge0: link state changed to UP
vlan102: link state changed to UP
vlan116: link state changed to UP
<l5i>vnlan1k15: linkU staPte changed to UP
vlan114: link state changed to UP
vlan113: link state changed to UP
vlan112: link state changed to UP
vlan110: link state changed to UP
vlan111: link state changed to UP
vlan108: link state changed to UP
vlan10: link state changed to UP
vlan109: link state changed to UP
vlan106: link state changed to UP
vlan107: link state changed to UP
vlan104: link state changed to UP
vlan105: link state changed to UP
--Boundary-00=_sBRGM6JwsDPp7Zd--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201006162157.00522.artem_kim>