Date: Mon, 02 Feb 2004 23:23:14 +0100 From: Andreas Braukmann <braukmann@tse-online.de> To: Mark Sergeant <msergeant@iexec.com.au> Cc: amd64@freebsd.org Subject: Re: [Fwd: Re: Dual processor, AMD 64 machine freezing.] Message-ID: <2147483647.1075764194@[192.168.222.11]> In-Reply-To: <1075684775.1308.24.camel@localhost> References: <1075684775.1308.24.camel@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
--On Montag, 2. Februar 2004 11:19 Uhr +1000 Mark Sergeant <msergeant@iexec.com.au> wrote: > It should be noted that I was able to do a make world & kernel without > the machine hanging on the local console. hmmmpf. No irq-routing-guru hanging around? > -----Forwarded Message----- >> From: Mark Sergeant <msergeant@snsonline.net> >> To: Andreas Braukmann <braukmann@tse-online.de> >> Subject: Re: Dual processor, AMD 64 machine freezing. >> > > 2 x Opteron 248 >> > > 2 x 1GB sticks PC 2700 ECC ram >> > > adaptec scsi raid card. >> > > raid 5 array + 1 hot spare. >> > > Motherboard has onboard video, dual intel gigabit nics (bge). That would be the 2880's version without dual scsi (mpt(4))? It might be a hint, that I wasn't able to get the irqs right, if I disabled the scsi devices (bad news for you). As far as your dmesg goes you've disabled the S-ATA controller; you may try to enable it. >> > Do you mind showing the mptable output? >> >> http://www.snsonline.net/~sarge/mptable.out Same BIOS revision, but with SCSI and S-ATA enabled (currently without the aac) running 5.2RC2: mptable: <http://rnv2.tse-online.de/ab/k8s-amd64-52rc-mptable.txt>; that's quite different from yours. dmesg: <http://rnv2.tse-online.de/ab/k8s-amd64-52rc.txt>; dmesg -v would be interesting because of the more detailed information regarding the apic/irq-routing configuration. The problem is, that booting the amd64-kernel in verbose mode produces a lot of ata- and acpi related garbage. -Andreas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2147483647.1075764194>