Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 21 Mar 2003 14:13:57 -0000
From:      "Lawrence Farr" <freebsd-hw@epcdirect.co.uk>
To:        "'Bruce Campbell'" <bruce@engmail.uwaterloo.ca>, <freebsd-hardware@freebsd.org>
Cc:        <freebsd-questions@freebsd.org>
Subject:   RE: problem on 1TB filesystem RAID 5 3ware
Message-ID:  <003301c2efb4$1cb23cf0$c806a8c0@lfarr>
In-Reply-To: <1048255662.3e7b1cae5341c@www.nexusmail.uwaterloo.ca>

next in thread | previous in thread | raw e-mail | index | archive | help
Have a look at:

http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/twe/

Lawrence Farr
EPC Direct Limited 

> -----Original Message-----
> From: owner-freebsd-hardware@FreeBSD.ORG 
> [mailto:owner-freebsd-hardware@FreeBSD.ORG] On Behalf Of 
> Bruce Campbell
> Sent: 21 March 2003 14:08
> To: freebsd-hardware@freebsd.org
> Cc: freebsd-questions@freebsd.org
> Subject: Re: problem on 1TB filesystem RAID 5 3ware
> 
> 
> 
> The author of the twe driver, Michael Smith, confirms he
> hasn't worked on the driver for several years now.
> 
> Quoting Bruce Campbell <bruce@engmail.uwaterloo.ca>:
> > 
> > I openned a case with 3ware tech support and they responded:
> > 
> > >We do not support FreeBSD plus the
> > >current driver for FreeBSD has not been
> > >updated for some time to keep up with
> > >firmware changes. 
> > >
> > >Please try linux instead. 
> > 
> > So I guess I will try that and see what happens.
> > 
> > 
> > Quoting Simon <simon@optinet.com>:
> > > 
> > > I have a hard time believing that hardware implementation of
> > > RAID5 would corrupt files over RAID10, perhaps your 3ware
> > > card/its firmware is malfunctioning, but anything is possible.
> > > Well, I'll have to see for myself, I'm about to build RAID5 NAS
> > > using maxtor drives and 7500-8 3ware card.
> > > 
> > > -Simon
> > > 
> > > On Tue, 18 Mar 2003 08:05:36 -0500, Bruce Campbell wrote:
> > > 
> > > >
> > > >
> > > >Tested with RAID 10 instead of RAID 5, success !
> > > >
> > > >RAID 10 arrays tested:  6xWD200GB and 8xWD200GB both worked
> > > >RAID 5 arrays tested: 6xWD200GB and 4xWD200GB both failed
> > > >
> > > >Note: 3ware lists the WD 200GB disk as "Under Test". (ie 
> they have not yet
> > 
> > > >given it a "Compatible" rating) 
> > > >
> > > >details of tests and the procedure to detect the failure etc at
> > > >
> > >
> > 
> >http://www.freebsd.uwaterloo.ca/twiki/bin/view/Freebsd/Backup
ServerProblem
> > >
> > >I still have to try an officially approved drive.
> > >
> > >
> > >
> > >----------------------------------------
> > >This mail sent through www.mywaterloo.ca
> > >
> > >To Unsubscribe: send mail to majordomo@FreeBSD.org
> > >with "unsubscribe freebsd-hardware" in the body of the message
> > >
> > 
> > 
> > 
> 
> 
> -- 
> Bruce Campbell
> Engineering Computing
> CPH-2374B
> University of Waterloo
> (519)888-4567 ext 5889
> 
> ----------------------------------------
> This mail sent through www.mywaterloo.ca
> 


-- 
Bruce Campbell
Engineering Computing
CPH-2374B
University of Waterloo
(519)888-4567 ext 5889

----------------------------------------
This mail sent through www.mywaterloo.ca

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003301c2efb4$1cb23cf0$c806a8c0>