Date: Mon, 26 Dec 2005 17:44:33 +0100 (CET) From: Alexander Konovalenko <kono@kth.se> To: freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org Subject: "no carrier" on vr0 caused by suspend (FreeBSD 6.0) Message-ID: <20051226172520.V29157@omega.nanophys.kth.se>
next in thread | raw e-mail | index | archive | help
Hello,
recently I have upgraded my AMD Athlono-XP laptop to 6.0 STABLE,
everything works fine, even suspending with zzz works except
network interface vr0 which is in state "no carrier" right after wake up.
The only thing which helps is reboot.
Is there any work around?
RIGHT AFTER WAKE UP:
# ifconfig
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:40:d0:2d:b2:3f
media: Ethernet autoselect
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
#
#
# sysctl -a | grep vr
dev.vr.0.%desc: VIA VT6102 Rhine II 10/100BaseTX
dev.vr.0.%driver: vr
dev.vr.0.%location: slot=18 function=0 handle=\_SB_.PCI0.LAN0
dev.vr.0.%pnpinfo: vendor=0x1106 device=0x3065 subvendor=0x1631
subdevice=0x7002 class=0x020000
dev.vr.0.%parent: pci0
dev.vr.0.wake: 0
dev.miibus.0.%parent: vr0
NORMAL STATE:
# ifconfig
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:40:d0:2d:b2:3f
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
#
# sysctl -a|grep vr
dev.vr.0.%desc: VIA VT6102 Rhine II 10/100BaseTX
dev.vr.0.%driver: vr
dev.vr.0.%location: slot=18 function=0 handle=\_SB_.PCI0.LAN0
dev.vr.0.%pnpinfo: vendor=0x1106 device=0x3065 subvendor=0x1631
subdevice=0x7002 class=0x020000
dev.vr.0.%parent: pci0
dev.vr.0.wake: 0
dev.miibus.0.%parent: vr0
/Alexander Konovalenko
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051226172520.V29157>