Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 17 Jul 2006 10:16:52 +0100 (BST)
From:      "Dominic Marks" <dom@helenmarks.co.uk>
To:        freebsd-acpi@freebsd.org
Subject:   [Fwd: ACPI related crash on a Dell PowerEdge SC1420 regression  since  6.1-RELEASE]
Message-ID:  <3368.195.12.22.194.1153127812.squirrel@mail.helenmarks.co.uk>

next in thread | raw e-mail | index | archive | help
>>> Forwarding to -acpi since I had no reply on -stable.

Hello,

I upgraded a PowerEdge SC1420 which had been installed with 6.1-R to
6.1-S today and now it no longer boots with ACPI enabled. It doesn't
give a crash dump so here is the information I managed to note down
before it rebooted:

This happens after em and twe in the boot process.

FVA 0x20:0xc0afce73
SP  0x28:0xc0c20944
FP  0x28:0xc0c20958

Trap 12 in swapper.

I've no idea how useful this information is, hopeful it is a clue.
Full dmesg below (from a non-ACPI boot, of course), please let me know
if there is any other information I can provide.

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #0: Thu Jul 13 15:22:54 UTC 2006
    dom@gdc083.internal.graphdata.co.uk:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf4a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Logical CPUs per core: 2
real memory  = 1072218112 (1022 MB)
avail memory = 1040330752 (992 MB)
MPTable: <DELL     PE SC1420   >
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic1: Changing APIC ID to 9
ioapic1: Assuming intbase of 24
ioapic2: Changing APIC ID to 10
ioapic2: Assuming intbase of 48
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: unable to route slot 2 INTA
pcib0: unable to route slot 3 INTA
pcib0: unable to route slot 4 INTA
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCI-PCI bridge> irq 11 at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <MPTable PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pci2: <display, VGA> at device 12.0 (no driver attached)
pcib3: <MPTable PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib3
twe0: <3ware Storage Controller. Driver version 1.50.01.002> port
0xccb0-0xccbf mem 0xdd800000-0xddffffff irq 49 at device 13.0 on pci3
twe0: [GIANT-LOCKED]
twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0xccc0-0xccff mem 0xdd6e0000-0xdd6fffff irq 48 at device 14.0 on pci3
em0: Ethernet address: 00:13:72:8b:3c:a9
pcib4: <MPTable PCI-PCI bridge> irq 11 at device 3.0 on pci0
pci4: <PCI bus> on pcib4
pcib5: <MPTable PCI-PCI bridge> irq 11 at device 4.0 on pci0
pci5: <PCI bus> on pcib5
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f
irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
0xffa80800-0xffa80bff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: FREECOM. ATAPI-6 Bridge Controller, rev 2.00/0.00, addr 2
umass1: Freecom Classic Mobile 2.5' Hard Disk, rev 2.00/0.33, addr 3
pcib6: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci6: <PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf mem
0xdffffc00-0xdfffffff irq 18 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf
irq 18 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc9fff,0xca000-0xcbfff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
ukbd0: Dell Dell USB Keyboard, rev 1.10/2.00, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
1.10/3.00, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounter "TSC" frequency 2992515172 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <GCR-8485B/1.06> at ata1-master UDMA33
ad4: 76293MB <Seagate ST3808110AS 3.ADH> at ata2-master SATA150
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <TOSHIBA MK3021GAS 0811> Fixed Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 28615MB (58605120 512 byte sectors: 255H 63S/T 3648C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <FUJITSU MHV2040AT 0000> Fixed Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 38154MB (78140160 512 byte sectors: 255H 63S/T 4864C)
Trying to mount root from ufs:/dev/ad4s1a

Thanks!

Dominic



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3368.195.12.22.194.1153127812.squirrel>