Date: Fri, 17 Apr 1998 20:51:49 -0400 From: Sergei Shayevich <serega@bigfoot.com> To: Doug White <dwhite@resnet.uoregon.edu> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: DOS partition Assignments Message-ID: <3537F925.A99733CF@bigfoot.com> References: <Pine.BSF.3.96.980417110733.1265S-100000@gdi.uoregon.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hey Doug. Thanks for taking you time. Below is the dmesg output you wanted to look at FreeBSD 2.1.0-RELEASE #0: Sat Apr 4 22:24:17 1998 serega@wildcard.wright.edu:/usr/src/sys/compile/OTBEPTKA CPU: 100-MHz Pentium 815\\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x526 Stepping=6 Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC> real memory = 134217728 (131072K bytes) avail memory = 128126976 (125124K bytes) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio3 not found at 0x2e8 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 765 fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <Conner Peripherals 850MB - CFA850A> wd0: 813MB (1665216 sectors), 1652 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): <WDC AC31200F> wd1: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 1 (atapi): <FX400E/K04>, removable, intr, iordis wcd0: 689Kb/sec, 128Kb cache, audio play, 255 volume levels, ejectable tray wcd0: no disc inside, unlocked npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 5 drq 1 on isa sb0: <SoundBlaster 16 4.13> Probing for devices on the PCI bus: chip0 <Intel 82437 (Triton)> rev 1 on pci0:0 chip1 <Intel 82371 (Triton)> rev 2 on pci0:7 vga0 <VGA-compatible display device> rev 1 int a irq 10 on pci0:8 looks to me like wd2 isn't there at all, so I am still at a loss ... Sergei Doug White wrote: > On Thu, 16 Apr 1998, Sergei Shayevich wrote: > > > > With what error? Of course, the directory /dos/F/ must exist before this > > > will work. > > > > Dammit! That was stupid of me! I forgot to create /dos/F. Well it works now. > > It sees wd1 as /dos/F.Thank you. > > Good. > > > > > I thought that even if I were to let them be swapped but could see the > > > > 2Gig drive, it would be better than not having the 2Gig drive visible > > > > at all. So I tried mounting it as "F", but doing "mount -t msdos > > > > /dev/wd2s1 /dos/F" comes back with the message of device not being > > > > configured. > > > > > > Hm, either you can't see wd2 or the first slice on wd2 doesn't have > > > anything. Run `fdisk wd2' and figure out where the dos slice you're > > > trying to mount is. > > > > > > fdisk output from all the drives would be handy... > > > > Ok, below are the fdisk outputs for all 3 Hard Drives. > [snip] > > And as far as the 3rd HD goes, fdisk says "Cannot open disk /dev/rwd2 (Device > > not configured) > > Seems like BSD is not aware of that HD at all > > That would probably be correct. Please post the output of `dmesg'. > > Doug White | University of Oregon > Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant > http://gladstone.uoregon.edu/~dwhite | Computer Science Major To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3537F925.A99733CF>