Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 4 Feb 2001 17:51:23 -0800
From:      Elden Fenison <elden@moondog.org>
To:        questions@FreeBSD.ORG
Subject:   Can't compile kernel
Message-ID:  <20010204175123.A1545@moondog.org>

next in thread | raw e-mail | index | archive | help

--2oS5YaxWCcQjTEyO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

I just bought FreeBSD Desktop Edition 4.1. I was following the
instructions in the book for configuring the kernel... and the process
failed as you can see below.

root@dsl-46# pwd
/usr/src/sys/i386/conf
root@dsl-46# /usr/sbin/config -g FREEBIE 
Don't forget to do a ``make depend''
Kernel build directory is ../../compile/FREEBIE
root@dsl-46# cd ../../compile/FREEBIE/
root@dsl-46# make
make: don't know how to make ../../pci/pci_if.m. Stop

I'm attaching my kernel configuration. The books says you can help me
trouble shoot this.

-- 
-=Elden=-
http://www.moondog.org

--2oS5YaxWCcQjTEyO
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=FREEBIE

#
# FREEBIE -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/FREEBIE,v 1.246.2.8 2000/07/20 02:51:02 msmith Exp $

machine		i386
#cpu		I386_CPU
#cpu		I486_CPU
#cpu		I586_CPU
cpu		I686_CPU
ident		FREEBIE
maxusers	32

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

#options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
#options 	NFS			#Network Filesystem
#options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options		ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options 	NCPU=2			# number of CPUs
#options 	NBUS=4			# number of busses
#options 	NAPIC=1			# number of IO APICs
#options 	NINTR=24		# number of INTs

device		isa
#device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
#device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering
options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices

# SCSI Controllers
#device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
#device		amd		# AMD 53C974 (Teckram DC-390(T))
#device		dpt		# DPT Smartcache - See LINT for options!
#device		isp		# Qlogic family
#device		ncr		# NCR/Symbios Logic
#device		sym		# NCR/Symbios Logic (newer chipsets)
#options		SYM_SETUP_LP_PROBE_MAP=0x40
				# Allow ncr to attach legacy NCR devices when 
				# both sym and ncr are configured

#device		adv0	at isa?
#device		adw
#device		bt0	at isa?
#device		aha0	at isa?
#device		aic0	at isa?

# SCSI peripherals
device		scbus		# SCSI bus (required)
#device		da		# Direct Access (disks)
#device		sa		# Sequential Access (tape etc)
device		cd		# CD
#device		pass		# Passthrough device (direct SCSI access)

# RAID controllers
#device		ida		# Compaq Smart RAID
#device		amr		# AMI MegaRAID
#device		mlx		# Mylex DAC960 family
#device		twe		# 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
#device		apm0    at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
#device		card
#device		pcic0	at isa? irq 10 port 0x3e0 iomem 0xd0000
#device		pcic1	at isa? irq 11 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
#device		sio2	at isa? disable port IO_COM3 irq 5
#device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
#device		plip		# TCP/IP over parallel
#device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		tx		# SMC 9432TX (83c170 ``EPIC'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')
#device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')

# PCI Ethernet NICs that use the common MII bus controller code.
#device		miibus		# MII bus support
#device		dc		# DEC/Intel 21143 and various workalikes
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		tl		# Texas Instruments ThunderLAN
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.
#device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
#device		ex
#device		ep
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
#device		wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
#device		an
# Xircom Ethernet
#device		xe
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
#device		fe0	at isa? port 0x300
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
#device		lnc0	at isa? port 0x280 irq 10 drq 0
#device		cs0	at isa? port 0x300
#device		sn0	at isa? port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif	4	# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
#device		uhci		# UHCI PCI->USB interface
#device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
#device		uhid		# "Human Interface Devices"
#device		ukbd		# Keyboard
#device		ulpt		# Printer
#device		umass		# Disks/Mass storage - Requires scbus and da
#device		ums		# Mouse
# USB Ethernet, requires mii
#device		aue		# ADMtek USB ethernet
#device		cue		# CATC USB ethernet
#device		kue		# Kawasaki LSI USB ethernet


--2oS5YaxWCcQjTEyO--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010204175123.A1545>