Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 11 Feb 2020 09:57:29 -0800
From:      Pete Wright <pete@nomadlogic.org>
To:        Noah Palmer <noahpalmerversion1@gmail.com>, freebsd-questions@freebsd.org
Subject:   Re: Intel graphics not loading
Message-ID:  <b349720a-0cc4-6b2e-30ca-371b6eca513f@nomadlogic.org>
In-Reply-To: <CACd7u--s2=WRsnd6BQs0hQDkNsFJ1GQ09M5nmngyuR3L41+eMA@mail.gmail.com>
References:  <CACd7u--s2=WRsnd6BQs0hQDkNsFJ1GQ09M5nmngyuR3L41+eMA@mail.gmail.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help


On 2020-02-11 09:44, Noah Palmer wrote:
> I cannot get the Intel graphics driver to load on my laptop. I have
> "drm-kmod", and "xf86-video-intel" installed. I have 'kldlist="i915kms"' in
> /etc/rc.conf. I am a member of the video group. I am on 12.1-STABLE. If I
> try to boot normally the text is all garbled and unreadable. if I use "gop
> set 4" in the bootloader, the screen properly loads at a lower resolution.
> This computer uses UEFI, I am unable to turn it off. The system loads at
> the proper resolution on 13.0-CURRENT. The i915kms is loaded into the
> kernel. dmesg lists the graphics card as <VGA-compatible display>. This is
> an NVIDIA Optimus laptop, but I don't think that makes a difference because
> the intel card has control over the display.

Hi, what is the Intel graphics adapter you are using on this system?  Do 
you happen to have the dmesg output from your system when it 
successfully loads the kernel module under CURRENT?  It also would be 
helpful if you could share your dmeseg buffer from 12.1-STABLE when it 
loads the drm-kmod module.

Cheers,
-pete

-- 
Pete Wright
pete@nomadlogic.org
@nomadlogicLA




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?b349720a-0cc4-6b2e-30ca-371b6eca513f>