Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 22 Sep 2017 06:54:36 +0000
From:      Yoshiro MIHIRA <sanpei.ml@gmail.com>
To:        Boris Samorodov <bsam@passap.ru>, freebsd-arm@freebsd.org
Subject:   Re: boot.ini file for Odroid-C1 on FreeBSD wiki page
Message-ID:  <CALwmBx3afhwDOtpnZeF91JBhLkkOr1T3PB2x2Pe9287J4eVg-A@mail.gmail.com>
In-Reply-To: <6706b32d-4278-d82c-92e6-069121cf48a2@passap.ru>
References:  <CALwmBx0zjVpUNK3oYjkzEVxxLkz3FqTOprS4quXvTv-Eu7fBVg@mail.gmail.com> <26c67e40-8b90-57f1-de32-e60d1cffe1b9@passap.ru> <CALwmBx1Vv6_tZFtg7AzmJSBL4-HS8VzyncNo34HbBc_wJf66NQ@mail.gmail.com> <6706b32d-4278-d82c-92e6-069121cf48a2@passap.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Boris-san

- boot without Serial Console.

I tested Odroid-C1 without Serial Console. It can start it without serial
console. Unfortunately I don't know
why Boris's enviroment is not.

Tested kernel
FreeBSD 12.0-CURRENT #1 r321382M

U-boot:U-boot-00000-ge7d4447-dirty(odroidc@odroidc-v2011.03) (Jan 27 2015 -
01:36:55)
http://archlinuxarm.org/developers/downloads

Yoshiro MIHIRA


2017=E5=B9=B48=E6=9C=8816=E6=97=A5(=E6=B0=B4) 2:59 Boris Samorodov <bsam@pa=
ssap.ru>:

> 15.08.2017 12:57, Yoshiro MIHIRA =D0=BF=D0=B8=D1=88=D0=B5=D1=82:
> > Hi.
> >
> > Currently I could not test something with ODROID-C1(because I use it as
> my
> > parent's home VPN router).
> >
> > 1. add boot.ini and fix gpart block size
> >
> > I updated wiki page
> >
> https://wiki.freebsd.org/action/diff/FreeBSD/arm/Odroid-C1?action=3Ddiff&=
rev1=3D9&rev2=3D10
>
> Great, thanks!
>
> > 2. growfs
> >
> > I think growfs command is for freebsd partition(mmcsd0s2). So growfs
> > /dev/mmcsd0s2?
>
> Ah, yes, sure.
>
> > 3. serial console is need to boot or not?
>
> That was just a quesion. I wanted to get a headless machine but
> didn't manage to boot Ocdoid-C1 without serial console.
>
> > Next September I will try to boot ODROID-C1 without serial console cabl=
e,
> > if I have a time.
>
> That would be interesting.
>
> Thank you.
>
> > 2017=E5=B9=B48=E6=9C=887=E6=97=A5(=E6=9C=88) 6:19 Boris Samorodov <bsam=
@passap.ru>:
>
> >> 04.08.2017 09:15, Yoshiro MIHIRA =D0=BF=D0=B8=D1=88=D0=B5=D1=82:
> >>
> >>> I will add boot.ini information to FreeBSD wiki page(1), if no one
> reply
> >> my
> >>> email until  10/Aug.
> >>
> >> That will be great.
> >>
> >> I have some more questions/fixes to "Steps to prepare SD card".
> >>
> >> 1. There are two commands:
> >> ---
> >> gpart add -t fat16 -b 1134 -s 64M mmcsd0
> >> gpart add -t freebsd -b 132174 mmcsd0
> >> ---
> >>
> >> I doubt the second command is precise. 64M is 131072 blocks,
> >> 131072 + 1134 =3D 132206.
> >>
> >> If I use those commands I get the error after the second one:
> >> ---
> >> gpart: autofill: No space left on device
> >> ---
> >>
> >> The value 132206 has a success. So the second command should be:
> >> ---
> >> gpart add -t freebsd -b 132206 mmcsd0
> >> ---
> >>
> >> 2. Since we prepare the final disk, I'd add a growfs command at the
> >> end of those steps:
> >> ---
> >> growfs /dev/mmcsd0
> >> ---
> >>
> >> HTH & WBR
> >> --
> >> bsam
> >> _______________________________________________
> >> freebsd-arm@freebsd.org mailing list
> >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
> >
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALwmBx3afhwDOtpnZeF91JBhLkkOr1T3PB2x2Pe9287J4eVg-A>