Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 6 Jun 1998 10:09:44 -0700 (PDT)
From:      Julian Elischer <julian@whistle.com>
To:        notme <notme@lvdi.net>
Cc:        "freebsd-questions@FreeBSD.ORG" <freebsd-questions@FreeBSD.ORG>
Subject:   Re: IDE Controller
Message-ID:  <Pine.BSF.3.95.980606100910.22014B-100000@current1.whistle.com>
In-Reply-To: <3579600E.425BDD1@lvdi.net>

next in thread | previous in thread | raw e-mail | index | archive | help
well for start try using wdc0
that's the first IDE controller


On Sat, 6 Jun 1998, notme wrote:

> Hi,
>     I have try booting and type "-cv",
> but after I messed with the config,
> FreeBSD still says "wcd1 not
> found at <port>"  Is there any
> other way of fixing this problem?
> 
> Thank you in advance
> 
> Frankie
> 
> 
> Julian Elischer wrote:
> 
> > if you type '-cv'
> > when faced with the boot prompt, you will
> > be given a confiuration editor.
> >
> > check the interrupt and port for wdc0
> >
> > you will find that it is IRQ14 and 0x1F0
> > which is the standard settings for the IDE cntroller
> > your settings  IRQ15 and 0x170 are the settings for the SECOND IDE
> > controller. You should either edit the config or set up the card
> > differently.
> >
> > On Fri, 5 Jun 1998, notme wrote:
> >
> > > Hi,
> > >     My Free BSD is not detecting
> > > my IDE Controller.  It is set to
> > > IRQ 15, 0X170, but the FBSD
> > > doesn't detect it.  It works fine
> > > in Windows 95 though.
> > > Please help!
> > >
> > > Please directly to this address.
> > >
> > > notme@lvdi.net
> > >
> > > Thank you in advance!
> > >
> > >
> > > Frankie
> > >
> > >
> > > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > with "unsubscribe freebsd-questions" in the body of the message
> > >
> 
> 
> 
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95.980606100910.22014B-100000>