Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Mar 2006 16:45:27 -0600
From:      Derek Ragona <derek@computinginnovations.com>
To:        Grant Peel <gpeel@thenetnow.com>, <freebsd-questions@freebsd.org>
Subject:   Re: More Server Crash Saga
Message-ID:  <6.0.0.22.2.20060316164205.028bae80@mail.computinginnovations.com>
In-Reply-To: <005501c64943$37f4e2b0$6501a8c0@GRANT>
References:  <005501c64943$37f4e2b0$6501a8c0@GRANT>

next in thread | previous in thread | raw e-mail | index | archive | help
Grant,

That is a one unit rack mount server, which makes it prone to have heat 
problems, particularly under any load.  You might want to check the ambient 
heat and the internal heat sensors as well.

That server uses an intel chipset (and probably an intel motherboard) which 
should allow "out-of-band" monitoring.  You should see what you can use to 
monitor the system and see what the system is reporting prior to a lockup.

It may be time to just call dell and have them send a replacement MB or 
entire unit.

         -Derek


At 03:47 PM 3/16/2006, Grant Peel wrote:
>Hi all,
>
>Still getting crashing today ... FreeBSD 6.0 PE 1850
>
>Does the output of vmstat -i for fove seconds show a problem? Interupt storm?
>
>I have been searching, trying to find out what the 'rate' means and what 
>should it be?
>
>interrupt                          total       rate
>irq0: clk                        3277223        999
>irq5: em1                           8877          2
>irq6: ehci0 atapci0                   85          0
>irq7: mpt0 uhci2                   56401         17
>irq8: rtc                         419429        127
>irq11: em0 uhci0                   85684         26
>irq13: npx0                            1          0
>irq14: ata0                           48          0
>Total                            3847748       1173
>root on s1# vmstat -i
>interrupt                          total       rate
>irq0: clk                        3278793        999
>irq5: em1                           8883          2
>irq6: ehci0 atapci0                   85          0
>irq7: mpt0 uhci2                   56408         17
>irq8: rtc                         419630        127
>irq11: em0 uhci0                   85752         26
>irq13: npx0                            1          0
>irq14: ata0                           48          0
>Total                            3849600       1174
>root on s1# vmstat -i
>interrupt                          total       rate
>irq0: clk                        3280691        999
>irq5: em1                           8889          2
>irq6: ehci0 atapci0                   85          0
>irq7: mpt0 uhci2                   56408         17
>irq8: rtc                         419873        127
>irq11: em0 uhci0                   85843         26
>irq13: npx0                            1          0
>irq14: ata0                           48          0
>Total                            3851838       1173
>root on s1# vmstat -i
>interrupt                          total       rate
>irq0: clk                        3282850        999
>irq5: em1                           8891          2
>irq6: ehci0 atapci0                   85          0
>irq7: mpt0 uhci2                   56408         17
>irq8: rtc                         420149        127
>irq11: em0 uhci0                   86153         26
>irq13: npx0                            1          0
>irq14: ata0                           48          0
>Total                            3854585       1174
>
>_______________________________________________
>freebsd-questions@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20060316164205.028bae80>