Date: Sat, 25 Mar 2000 15:58:39 +0100 (CET) From: Ronald Klop <ronald@node11a94.a2000.nl> To: freebsd-questions@freebsd.org Subject: pcm - device not configured (4.0-RELEASE) Message-ID: <Pine.BSF.4.21.0003251551070.213-100000@tulip100.evertsen.nl>
next in thread | raw e-mail | index | archive | help
Hello,
I have an PnP ESS soundcard which uses the pcm driver in 4.0-RELEASE.
It wasn't recognized while booting, so I added the PnP ID to the file
/usr/src/sys/i386/dev/sound/isa/sbc.c. Now it is recognized at boot, but
when I try to use it it complains about '/dev/pcaudio: device not
configured'. I did 'cat sound.wav > /dev/pcaudio' and I already did the
'MAKEDEV pcaudio'.
Does anybody recognize this and have a solution?
I'll include my dmesg/pnpinfo output here.
dmesg
-----
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #7: Sat Mar 25 15:32:42 CET 2000
root@tulip100.evertsen.nl:/usr/src/sys/compile/TULIP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (99.47-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x526 Stepping = 6
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 25165824 (24576K bytes)
avail memory = 21917696 (21404K bytes)
Preloaded elf kernel "kernel" at 0xc0298000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc029809c.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xecd0-0xecdf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371SB (PIIX3) USB controller> at 7.2 irq 11
pci0: <Alliance PM6422 SVGA controller> at 17.0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ed0 at port 0x300-0x31f iomem 0xd8000 irq 5 on isa0
ed0: address 00:00:00:00:00:00, type NE1000 (8 bit)
sbc0: <ESS RONALD> at port 0x220-0x22f irq 9 drq 0 on isa0
pcm0: <SB DSP 3.01 (ESS mode)> on sbc0
unknown0: <ESS PnP AudioDrive> at port 0x388-0x38b on isa0
joy0: <Generic PnP Joystick> at port 0x201 on isa0
unknown1: <ESS PnP AudioDrive> at port 0x320-0x321 irq 10 on isa0
unknown2: <Generic ESDI/IDE/ATA controller> at port 0x170-0x177,0x376 irq 15 on isa0
ad0: 810MB <QUANTUM TRB850A> [1647/16/63] at ata0-master using WDMA2
Mounting root from ufs:/dev/ad0s1a
pnpinfo
-------
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID ESS0968 (0x68097316), Serial Number 0x0000004d
PnP Version 1.0, Vendor Version 16
Device Description: ESS PnP AudioDrive
Logical Device ID: ESS0969 0x69097316 #0
I/O Range 0x220 .. 0x250, alignment 0x10, len 0x10
[not 16-bit addr]
IRQ: 5 7 9 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, , , Compatibility mode
Logical Device ID: PNPb020 0x20b0d041 #1
FIXED I/O base address 0x388 length 0x4
Logical Device ID: PNPb02f 0x2fb0d041 #2
FIXED I/O base address 0x201 length 0x1
Logical Device ID: PNPb006 0x06b0d041 #3
I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2
[not 16-bit addr]
IRQ: 5 7 10 - only one type (true/edge)
Logical Device ID: PNP0600 0x0006d041 #4
TAG Start DF
FIXED I/O base address 0x170 length 0x8
IRQ: 15 - only one type (true/edge)
TAG Start DF
FIXED I/O base address 0x1e8 length 0x8
IRQ: 11 - only one type (true/edge)
TAG Start DF
FIXED I/O base address 0x168 length 0x8
IRQ: 9 10 - only one type (true/edge)
TAG End DF
End Tag
Successfully got 24 resources, 5 logical fdevs
-- card select # 0x0001
CSN ESS0968 (0x68097316), Serial Number 0x0000004d
Logical device #0
IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220
IRQ 9 0
DMA 0 4
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #3
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 10 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #4
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 15 0
DMA 4 4
IO range check 0x00 activate 0x01
--
Ronald Klop
http://node11a94.a2000.nl/~ronald/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0003251551070.213-100000>