Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 02 Jan 2013 19:54:59 -0800
From:      Manfred Antar <null@pozo.com>
To:        KAHO Toshikazu <vinwa@elam.kais.kyoto-u.ac.jp>
Cc:        , freebsd-current@freebsd.org, Gleb Smirnoff <glebius@FreeBSD.org>
Subject:   Re: loopback interface broken on current
Message-ID:  <201301030355.r033t4aI001542@pozo.com>
In-Reply-To: <89160.1357182550@pf2.ed.niigata-u.ac.jp>
References:  <201212271705.qBRH5VHU006208@pozo.com> <20130101102255.GA25661@FreeBSD.org> <201301011040.r01Ae37A043153@pozo.com> <20130101194803.GB25661@glebius.int.ru> <201301012042.r01Kgq6E001548@pozo.com> <20130102201330.GC25661@glebius.int.ru> <201301022325.r02NPKEE076633@pozo.com> <89160.1357182550@pf2.ed.niigata-u.ac.jp>

next in thread | previous in thread | raw e-mail | index | archive | help
At 07:09 PM 1/2/2013, KAHO Toshikazu wrote:
>  Hello,
>
>I have a similar problem if "ifconfig_lo0" line is exist in /etc/rc.conf.
>Can you remove lo0 configure line from /etc/rc.conf.
>
>> /etc/rc.conf:
>> ifconfig_lo0="inet 127.0.0.1"           # default loopback device configuration.

Ok
I commented out that line and it seems to work.
There is still ====>ifa_del_loopback_route: deletion failed: 3
that wasn't there before,but the 127.0.0.1 seems to be configured now:

Setting hostname: pozo.com.
bge0: link state changed to DOWN
ifa_del_loopback_route: deletion failed: 3
bge0: link state changed to UP
Starting Network: lo0 bge0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
        inet 127.0.0.1 netmask 0xff000000 
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether 00:0e:7f:66:30:20
        inet 192.168.0.5 netmask 0xffffff00 broadcast 192.168.0.255 
        inet6 fe80::20e:7fff:fe66:3020%bge0 prefixlen 64 scopeid 0x1 
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
Starting devd.
add net default: gateway 192.168.0.1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
Waiting for bge0 to have link.
Waiting for 192.168.0.1 to respond to ICMP.

#########################################################################

(~)4999}ping localhost
PING localhost (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.029 ms
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.039 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.050 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.045 ms
64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.042 ms
64 bytes from 127.0.0.1: icmp_seq=5 ttl=64 time=0.044 ms
64 bytes from 127.0.0.1: icmp_seq=6 ttl=64 time=0.047 ms
64 bytes from 127.0.0.1: icmp_seq=7 ttl=64 time=0.045 ms
^C
--- localhost ping statistics ---
8 packets transmitted, 8 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.029/0.043/0.050/0.006 ms
(~)5000}

Manfred

========================
||      null@pozo.com           ||
||      Ph. (415) 681-6235      ||
======================== 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201301030355.r033t4aI001542>