Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 11 Feb 2020 14:01:32 -0500
From:      Noah Palmer <noahpalmerversion1@gmail.com>
To:        Pete Wright <pete@nomadlogic.org>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Intel graphics not loading
Message-ID:  <CACd7u-8DiAZfktJGS83BcfVUHA5SjZvMnKPuZD+bv_H696nBYg@mail.gmail.com>
In-Reply-To: <b349720a-0cc4-6b2e-30ca-371b6eca513f@nomadlogic.org>
References:  <CACd7u--s2=WRsnd6BQs0hQDkNsFJ1GQ09M5nmngyuR3L41+eMA@mail.gmail.com> <b349720a-0cc4-6b2e-30ca-371b6eca513f@nomadlogic.org>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Tue, Feb 11, 2020 at 12:57 PM Pete Wright <pete@nomadlogic.org> wrote:

>
>
> On 2020-02-11 09:44, Noah Palmer wrote:
> > I cannot get the Intel graphics driver to load on my laptop. I have
> > "drm-kmod", and "xf86-video-intel" installed. I have 'kldlist="i915kms"'
> in
> > /etc/rc.conf. I am a member of the video group. I am on 12.1-STABLE. If I
> > try to boot normally the text is all garbled and unreadable. if I use
> "gop
> > set 4" in the bootloader, the screen properly loads at a lower
> resolution.
> > This computer uses UEFI, I am unable to turn it off. The system loads at
> > the proper resolution on 13.0-CURRENT. The i915kms is loaded into the
> > kernel. dmesg lists the graphics card as <VGA-compatible display>. This
> is
> > an NVIDIA Optimus laptop, but I don't think that makes a difference
> because
> > the intel card has control over the display.
>
> Hi, what is the Intel graphics adapter you are using on this system?  Do
> you happen to have the dmesg output from your system when it
> successfully loads the kernel module under CURRENT?  It also would be
> helpful if you could share your dmeseg buffer from 12.1-STABLE when it
> loads the drm-kmod module.
>
> Cheers,
> -pete
>
> --
> Pete Wright
> pete@nomadlogic.org
> @nomadlogicLA
>
>
I should have been more clear with the 13-CURRENT thing, I haven't loaded
the intel driver yet just the framebuffer load correctly. The only thing
related to drm in dmesg is a message saying "drm loaded" late in the boot
process. According to linux the adaptor is "VGA compatible controller:
Intel Corporation UHD Graphics 630 (Mobile)."



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?CACd7u-8DiAZfktJGS83BcfVUHA5SjZvMnKPuZD+bv_H696nBYg>