Date: Thu, 14 Aug 2008 12:02:50 +0400 From: sam <samflanker@gmail.com> To: Jeremy Chadwick <koitsu@FreeBSD.org> Cc: freebsd-hackers@freebsd.org, "Andrey V. Elsukov" <bu7cher@yandex.ru>, elloallo@infinito.it Subject: Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA Message-ID: <48A3E6AA.9000205@gmail.com> In-Reply-To: <20080814072713.GA1939@eos.sc1.parodius.com> References: <48A3D034.9090809@gmail.com> <48A3D43E.2070101@yandex.ru> <48A3D771.5010601@gmail.com> <20080814071616.GA758@eos.sc1.parodius.com> <20080814072713.GA1939@eos.sc1.parodius.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Jeremy Chadwick wrote: > On Thu, Aug 14, 2008 at 12:16:16AM -0700, Jeremy Chadwick wrote: > >> On Thu, Aug 14, 2008 at 10:57:53AM +0400, sam wrote: >> >>> Andrey V. Elsukov wrote: >>> >>>> sam wrote: >>>> >>>>> FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD >>>>> 2008 root@:/usr/obj/usr/src/sys/GENERIC i386 >>>>> |-------------------------------------------------------------------- >>>>> >>>>> please, any solution ? >>>>> >>>> Probably speed is limited via jumpers on your hard drive. >>>> >>>> >>> http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409&p_created=#jumper >>> tried it >>> >>> without results >>> >> FWIW, the only time I've seen this happen is when there's a jumper >> limiting the capability. You should have **removed** the OPT1 jumper, >> and left any other jumpers alone. >> >> If you're absolutely sure the jumper is removed, I'll purchase one of >> these drives and test it on an ICH7 (Supermicro PDSMi+) to confirm your >> findings. >> > > Actually, I don't need to -- I'm using WD5000AAKS disks myself on > that exact system: > > atapci1: <Intel AHCI controller> port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe8600400-0xe86007ff irq 19 at device 31.2 on pci0 > atapci1: [ITHREAD] > atapci1: AHCI Version 01.10 controller with 4 ports detected > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: [ITHREAD] > ata4: <ATA channel 2> on atapci1 > ata4: [ITHREAD] > ata5: <ATA channel 3> on atapci1 > ata5: [ITHREAD] > > ad6: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata3-master SATA300 > ad8: 476940MB <WDC WD5000AAKS-00TMA0 12.01C01> at ata4-master SATA300 > may issue in <Intel ICH7 SATA300 controller> driver ? ---------------------------------------------------- atapci1: <Intel ICH7 SATA300 controller> port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f irq 19 at device 31.2 on pci0 ---------------------------------------------------- /Vladimir Ermakov
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48A3E6AA.9000205>