Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 11 Jun 2000 21:30:38 +1000
From:      Danny <dannyh@idx.com.au>
To:        freebsd-questions@freebsd.org
Subject:   Xsane and scanner query
Message-ID:  <00061121341000.00465@desktop.freebsd.org>

next in thread | raw e-mail | index | archive | help

--

-Hello
- Currently I have a optic Pro 4830p scanner plugged in the parlell port
- I have installed xsane
- Not suprisingly I have to MAKDEV scanner or something

Question
- I want to know what exactly I have to do to get my scanner to work.


- Here is the output of dmesg 

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.3-RELEASE #0: Wed Jun  7 17:50:00 EST 2000
    dannyh@desktop.freebsd.org:/usr/src/sys/compile/DESKTOP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (166.59-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 67108864 (65536K bytes)
avail memory = 61571072 (60128K bytes)
Preloaded elf kernel "kernel" at 0xc0388000.
Probing for devices on PCI bus 0:
chip0: <Intel 82437VX PCI cache memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
vga0: <S3 Trio graphics accelerator> rev 0x54 int a irq 255 on pci0.9.0
ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 10 on pci0.10.0
ed1: address 00:60:67:2c:38:83, type NE2000 (16 bit) 
Probing for PnP devices:
CSN 1 Vendor ID: YMH0020 [0x2000a865] Serial 0xffffffff Comp ID: PNPb02f [0x2fb0d041]
mss_attach <Yamaha SA2>1 at 0x530 irq 5 dma 0:1 flags 0x11
setting up yamaha registers
set yamaha master volume to max
pcm1 (CS423x/Yamaha/AD1816 <Yamaha SA2> sn 0xffffffff) at 0x530-0x537 irq 5 drq 0 flags 0x11 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <FUJITSU MPD3064AT>
wd0: 6187MB (12672450 sectors), 13410 cyls, 15 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <CD-920E/12A>, removable, intr, dma, iordy
acd0: drive speed 2062KB/sec, 120KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
wdc1 not found at 0x170
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not probed due to drq conflict with pcm1 at 0
cs0 not found at 0x300
ze0 not found at 0x300
zp0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
changing root device to wd0s1a


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00061121341000.00465>