Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 18 Jan 2002 10:44:02 -0500 (EST)
From:      Bernie Doehner <bdoehner@enterasys.com>
To:        "Jonathan M. Bresler" <jmb@hub.freebsd.org>
Cc:        <questions@freebsd.org>, <mobile@freebsd.org>, <hardware@freebsd.org>
Subject:   Re: trouble with PCMCIA running 4.4-RELEASE or 5.0-CURRENT on Tecra 8000
Message-ID:  <20020118104325.M38991-100000@roam.enterasys.com>
In-Reply-To: <20020118154155.24D3637B400@hub.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Jonathan,

Could you please send me your /etc/pccard.conf?

Many thanks.
Bernie


On Fri, 18 Jan 2002, Jonathan M. Bresler wrote:

> Date: Fri, 18 Jan 2002 07:41:55 -0800 (PST)
> From: Jonathan M. Bresler <jmb@hub.freebsd.org>
> To: bdoehner@enterasys.com
> Cc: questions@freebsd.org, mobile@freebsd.org, hardware@freebsd.org
> Subject: Re: trouble with PCMCIA running 4.4-RELEASE or 5.0-CURRENT on
>     Tecra 8000
>
>
> >
> > Does dmesg on your tecra 8000 also say:
> > pcic0: PCI Memory allocated: 0x44000000
> > pccard0: <PC Card bus (classic)> on pcic0
> > pci_cfgintr_linked: linked (61) to hard-routed irq 11
> > pci_cfgintr: 0:11 INTB routed to irq 11
> > pcic1: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 11 at device 11.1 on pci0
> > pcic1: PCI Memory allocated: 0x44001000
>
>   identical.
>
> > Did you have to set any MIBs in /boot/loader.conf to get your PCMCIA to work?
>
>   none
>
> > What version of the BIOS are you running?  Mine is ACPI Bios version 9.3, which
> > I believe is the latest.
>
>   i have a very old acpi bios 7.A0
>
> > On screen 2 of the BIOS, what did you set for Device Config, and PC CARD Controller
> > Mode?
> > Mine is set to Device Config = All Devices, Conctroller Mode = Auto-Selected.
>
>   i have the same for these two.
>
>   i would recommend borrowing a known working pcmcia card.  that will
>   help narrow the search space.
>
> jmb
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020118104325.M38991-100000>