Date: Wed, 20 Jun 2001 12:29:06 +0200 (CEST) From: Alexander Leidinger <Alexander@Leidinger.net> To: current@freebsd.org Subject: orm driver itches (vga1, sc1, pca[12], isic1)? Message-ID: <200106201029.f5KAT7f03700@Magelan.Leidinger.net>
next in thread | raw e-mail | index | archive | help
--0-1804289383-993032949=:3596
Content-Type: TEXT/plain; charset=us-ascii
Hi,
some parts of my dmesg output, the complete one is attached:
---snip---
vga1: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
sc1: <System console> at flags 0x6 on isa0
sc1: MDA <16 virtual consoles, flags=0x6>
fdc1: cannot reserve I/O port range
pca1 at port 0x40 on isa0
isic1: Could not get iobase for AVM A1/Fritz!
ppc1: parallel port not found.
pca2: <AT-style speaker sound> at port 0x61 on isa0
---snip---
I've only one graphic card (Voodoo3), one floppy disk drive, one
parallel port and one internal speaker (and ISDN (isa card) works, even
if it moans about the iobase).
Is this something related to the orm driver (the driver should be able
to handle it yet / the driver doesn't handle it yet but it will handle
it soon)?
Bye,
Alexander.
--
Where do you think you're going today?
http://www.Leidinger.net Alexander @ Leidinger.net
GPG fingerprint = C518 BC70 E67F 143F BE91 3365 79E2 9C60 B006 3FE7
--0-1804289383-993032949=:3596
Content-Type: TEXT/plain; name="dmesg.out"
Content-Disposition: attachment; filename="dmesg.out"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #15: Tue Jun 19 21:53:50 CEST 2001
root@Magelan.Leidinger.net:/big/usr/src/sys/compile/WORK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268423168 (262132K bytes)
avail memory = 256868352 (250848K bytes)
Preloaded elf kernel "kernel" at 0xc0436000.
Preloaded elf module "cd9660.ko" at 0xc043609c.
Preloaded elf module "linux.ko" at 0xc043613c.
Preloaded elf module "snd_pcm.ko" at 0xc04361dc.
Preloaded elf module "snd_sbc.ko" at 0xc043627c.
Preloaded elf module "snd_sb16.ko" at 0xc043631c.
Preloaded elf module "usb.ko" at 0xc04363bc.
Preloaded elf module "agp.ko" at 0xc0436458.
Preloaded elf module "accf_data.ko" at 0xc04364f4.
Preloaded elf module "accf_http.ko" at 0xc0436598.
Preloaded elf module "atspeaker.ko" at 0xc043663c.
Preloaded elf module "joy.ko" at 0xc04366e0.
Pentium Pro MTRR support enabled
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc0339837 (1000117)
VESA: 3dfx Interactive, Inc.
Using $PIR table, 7 entries at 0xc00f0d10
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0xe800-0xe80f irq 9 at device 4.3 on pci0
intpm0: I/O mapped e800
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped e400
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xb000-0xb0ff mem 0xd9800000-0xd9800fff irq 9 at device 6.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xa800-0xa81f irq 9 at device 10.0 on pci0
ed0: address 00:80:ad:40:bd:e7, type NE2000 (16 bit)
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
isic0 at port 0x1b00-0x1b1f,0x16e0-0x16ff,0x6e0-0x6ff,0xee0-0xeff,0x1300-0x131f,0x300-0x31f,0xb00-0xb1f irq 3 flags 0x4 on isa0
isic0: passive stack unit 0
isic0: AVM A1 or Fritz!Card Classic
pca0 at port 0x40 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
sc0: <System console> at flags 0x6 on isa0
sc0: VGA <16 virtual consoles, flags=0x206>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20010 on isa0
sio0: type ST16650A
sio1 at port 0x2e8-0x2ef irq 10 flags 0x20000 on isa0
sio1: type ST16650A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vga1: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
sc1: <System console> at flags 0x6 on isa0
sc1: MDA <16 virtual consoles, flags=0x6>
WARNING: Driver mistake: repeat make_dev("consolectl")
fdc1: cannot reserve I/O port range
pca1 at port 0x40 on isa0
WARNING: Driver mistake: repeat make_dev("pcaudio")
WARNING: Driver mistake: repeat make_dev("pcaudioctl")
isic1: Could not get iobase for AVM A1/Fritz!
ppc1: parallel port not found.
sbc0: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.13> on sbc0
joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0303> can't assign resources
pca2: <AT-style speaker sound> at port 0x61 on isa0
WARNING: Driver mistake: repeat make_dev("pcaudio")
WARNING: Driver mistake: repeat make_dev("pcaudioctl")
i4brbch: 2 raw B channel access device(s) attached
i4bisppp: 2 ISDN SyncPPP device(s) attached (VJ header compression)
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
i4b: ISDN call control device attached
i4btrc: 2 ISDN trace device(s) attached
i4bctl: ISDN system control port attached
ad0: 19547MB <FUJITSU MPE3204AT> [39714/16/63] at ata0-master UDMA33
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [32/64/96] at ata1-master PIO0
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s2a
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <TEAC CD-R55S 1.0Q> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 2 lun 0
cd1: <PIONEER CD-ROM DR-U16S 1.01> Removable CD-ROM SCSI-2 device
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
afd0: reading primary partition table: error reading fsbn 0
i4b: unit 0, assigned TEI = 65 = 0x41
pcm0: play interrupt timeout, channel dead
i4b-L2 i4b_T200_timeout: unit 0, RC = 0
--0-1804289383-993032949=:3596--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200106201029.f5KAT7f03700>