Date: Fri, 19 May 2000 13:34:22 -0400 (EDT) From: Ted Buswell <tbuswell@acadia.net> To: wietse@porcupine.org (Wietse Venema) Cc: freebsd-mobile@FreeBSD.ORG, freebsd-scsi@FreeBSD.ORG Subject: Re: Need FreeBSD 4.0 removable SCSI support Message-ID: <14629.31234.408264.179584@smpbox> In-Reply-To: <20000519165619.3AC404563D@spike.porcupine.org> References: <14629.21138.578322.41745@smpbox> <20000519165619.3AC404563D@spike.porcupine.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Wietse Venema writes: > Ted Buswell: > > I'm not sure about yours, but my 1460B does not list irq 3 as one of > > the valid IRQ's that it can generate. Check "pccardc dumpcis" and > > search for IRQ. While "timed out" messages could also be cable/device > > related, on my setup they indicated an IRQ conflict. > > Here's one data point with FreeBSD 3.4+PAO, same machine: > > card0: assign aic0 iobase 0x340 irq 3 > aic0: aic6360, dma, disconnection, parity check > (da0:aic0:0:0:0): ccb 0xc07c3800 - timed out, phase 0x0, state 0 > da0 at aic0 bus 0 target 0 lun 0 > da0: <iomega jaz 2GB E.15> Removable Direct Access SCSI-2 device > da0: 5.000MB/s transfers (5.000MHz, offset 8) > da0: 1911MB (3915600 512 byte sectors: 64H 32S/T 1911C) > > So the driver does gripe, but it survives, and that's what I need. > > Wietse Are you getting any errors other than during the rescan (i.e. while actually using the disk) ? -Ted To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14629.31234.408264.179584>