Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 21 Feb 2007 21:46:16 -0800
From:      "Ted Mittelstaedt" <>
To:        "FreeBSD Mailing List" <>, "jekillen" <>
Subject:   Re: Enet driver for Marvell
Message-ID:  <013301c75644$c5dcb850$3c01a8c0@coolf89ea26645>
References:  <>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
That driver isn't in FreeBSD 6.2 release

you can get it here for 6.2 plus instructions to install it:

It will be in FBSD 7

----- Original Message ----- 
From: "jekillen" <>
To: "FreeBSD Mailing List" <>
Sent: Monday, February 19, 2007 8:21 PM
Subject: Enet driver for Marvell

> Hello;
> A while ago, a matter of a few months I inquired of this list regarding
> installation of FreeBSD v6.0 on ASUS M2N32 WS Pro motherboard.
> I was not able to set up dual ethenet inter faces as the only option
> presented by sysinstall when configuring enet interface was
> fw30 as firewire ethernet emulation. I was advise to upgrade to v6.2
> which I have just done. I still do not have more than the fwe interface
> presented.
> The response to the original message, I can not find, but I was told
> that the motherboard was probably one with new Marvell interfaces.
> Now, I have looked at the features listed on the motherboard package
> and there it is;
> 2x Marvell 88E1116 PHY
> Is there a driver that has to be activated by kernel config setting or
> what is the status of support for this hardware in FreeBSD?
> I just looked through the supported hardware/ethernet devices for
> the i386 architecture and did not find any reference to Marvell.
> I purchase a cd set of v6.2 cds from FreeBSD Mall (not inplying
> any criticism, just that it represents a method of contribution to
> this project).
> This is frustrating because this machine is supposed to be a production
> web server. Hardware including dual 15K SCSI drives and adapter  has run
> in the neighborhood of $1000 and it still is not useful for it'
> intended purpose
> Any info or advice appreciated
> Thanks in advance;
> Jeff K
> _______________________________________________
> mailing list
> To unsubscribe, send any mail to

Want to link to this message? Use this URL: <$c5dcb850$3c01a8c0>