Date: Sat, 6 Sep 2003 18:51:22 +0500 From: thor@telecom.sarkor.uz (Timur) To: Monah Baki <mbaki@whywire.net> Cc: freebsd-questions@freebsd.org Subject: kernel compile Message-ID: <20030906135122.GA18632@telecom.sarkor.uz> In-Reply-To: <20030906135058.M6908@whywire.net> References: <20030906105150.GA18353@telecom.sarkor.uz> <20030906135058.M6908@whywire.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Sep 06, 2003 at 10:51:40AM -0400, Monah Baki wrote: > Have you tried recompiling the kernel with "device pcm" > yes, now I'm trying to compile new kernel. also I noticed, that my video card (nVidia TNT with 8 Megs) does not support X-Video extension (ie, nv driver does not support it). so I installed drivers from www.nvidia.com, which require USER_LDT option in kernel. So.. what I did.. I have added line 'device pcm' and 'option USER_LDT' and removed some drivers for devices I do not have (SCSI etc) and then tried to compile a kernel. But the build fails: linking kernel umass.o: In function `umass_cam_attach_sim': umass.o(.text+0x140f): undefined reference to `cam_simq_alloc' umass.o(.text+0x1435): undefined reference to `cam_sim_alloc' umass.o(.text+0x144e): undefined reference to `xpt_bus_register' umass.o(.text+0x145e): undefined reference to `cam_simq_free' umass.o: In function `umass_cam_rescan_callback': umass.o(.text+0x1477): undefined reference to `xpt_free_path' umass.o: In function `umass_cam_rescan': umass.o(.text+0x14c1): undefined reference to `xpt_periph' umass.o(.text+0x14ca): undefined reference to `xpt_create_path' umass.o(.text+0x14dd): undefined reference to `xpt_setup_ccb' umass.o(.text+0x14f8): undefined reference to `xpt_action' umass.o: In function `umass_cam_detach_sim': umass.o(.text+0x15af): undefined reference to `xpt_bus_deregister' umass.o(.text+0x15cd): undefined reference to `cam_sim_free' umass.o: In function `umass_cam_detach': umass.o(.text+0x160e): undefined reference to `xpt_create_path' umass.o(.text+0x162f): undefined reference to `xpt_async' umass.o(.text+0x1637): undefined reference to `xpt_free_path' umass.o: In function `umass_cam_action': umass.o(.text+0x19b7): undefined reference to `xpt_done' umass.o(.text+0x19c9): undefined reference to `xpt_done' umass.o: In function `umass_cam_cb': umass.o(.text+0x1ae1): undefined reference to `xpt_done' umass.o: In function `umass_cam_sense_cb': umass.o(.text+0x1be8): undefined reference to `xpt_done' umass.o(.text+0x1bf9): undefined reference to `xpt_done' umass.o(.text+0x1c13): more undefined references to `xpt_done' follow *** Error code 1 For the curious, my kernel config file: machine i386 cpu I686_CPU ident THOR maxusers 0 options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options USER_LDT #allow user-level control of i386 ldt options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # To support HyperThreading, HTT is needed in addition to SMP and APIC_IO #options HTT # HyperThreading Technology device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device agp # support several AGP chipsets # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet # sound device pcm
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030906135122.GA18632>