Date: Thu, 14 Jan 2010 12:11:44 -0800 From: Pyun YongHyeon <pyunyh@gmail.com> To: Floris Bos <info@je-eigen-domein.nl> Cc: freebsd-net@freebsd.org Subject: Re: kern/92090: [bge] bge: watchdog timeout -- resetting Message-ID: <20100114201144.GA1228@michelle.cdnetworks.com> In-Reply-To: <201001142108.02941.info@je-eigen-domein.nl> References: <201001140140.o0E1e5hr072464@freefall.freebsd.org> <201001140433.19229.info@je-eigen-domein.nl> <20100114175603.GW1228@michelle.cdnetworks.com> <201001142108.02941.info@je-eigen-domein.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jan 14, 2010 at 09:08:02PM +0100, Floris Bos wrote: > On Thursday 14 January 2010 06:56:03 pm Pyun YongHyeon wrote: > > On Thu, Jan 14, 2010 at 04:33:19AM +0100, Floris Bos wrote: > > > Hi, > > > > > > On Thursday 14 January 2010 03:54:52 am Pyun YongHyeon wrote: > > > > > == > > > > > bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdf900000-0xdf90ffff irq 16 at device 0.0 on pci32 > > > > > == > > > > > > > > > > After boot, the network works for about 5 seconds, barely enough time to get an IP by DHCP, and sent a ping or 2. > > > > > Then network connectivity goes down, and after some time there is a "bge0: watchdog timeout -- resetting" message. > > > > > > > > > > Then network works again for 5 seconds, and goes down again. All the time, repeatedly. > > > > > > > > > > The system works fine under Ubuntu. So I assume the hardware is ok. > > > > > > > > > > > > > I'm not sure but it looks like you have a BCM5784 controller. What is > > > > the output of "devinfo -rv | grep phy"? > > > > > > == > > > ukphy0 pnpinfo oui=0x50ef model=0x3a rev=0x4 at phyno=1 > > > ukphy1 pnpinfo oui=0x50ef model=0x3a rev=0x4 at phyno=1 > > > == > > > > Support for the PHY was added in r202269. > > Please try again after applying the change. Or you can download > > sys/dev/mii/miidevs and sys/dev/mii/brgphy.c from HEAD and rebuild > > kernel. > > Fetched the latest source using CVS on another computer, and transferred it to the system concerned by USB stick. > Rebuild the kernel, but the problem is still there. > Would you show me full dmesg output including "watchodg timeout" messages?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100114201144.GA1228>