Date: Sat, 18 Apr 1998 04:59:36 -0700 (PDT) From: "Bryan K. Ogawa" <bkogawa@primenet.com> To: nordwick@scam.XCF.Berkeley.EDU Cc: freebsd-questions@FreeBSD.ORG Subject: Re: supra 56i modem not recognized Message-ID: <199804181159.EAA19591@foo.primenet.com> References: <19980418035029.11984.qmail@xcf.berkeley.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
In localhost.freebsd.questions you write: >I just bought a new system and was trying to use a 2.2.5 cd to boot and >ftp install 3.0-current, but the modem is not recognized. I even tried >to actually install 2.2.5 and just use ppp to see if it worked, but nothing. >The system is a asus motherboard P2L97-DS (single PII-300) and the modem >booklet says it is a "supra 56i voice" whatever that is. On boot the PnP >bios detected the card, so that appears to work. I have since tried to >configure the jumpers for com1/irq4/3f8 and com2/irq3/2f8 and select the >ppp over com1/2 options but nothing seems to get to the modem. >On the screen, ppp starts up, I make sure that it set to cuaa0/1 and >then go into term mode. I type at<enter>, but nothing echos and nothing >clicks on the modem, nothing happens. >How can I fix this ? Should I just set it back to PnP and try to get a 3.0 >bot disk ? I have never used ppp on fbsd, only ethernet. >Pleae help, this is my second day of messing with this. Remember that com1 is cuaa0 and com2 is cuaa1 by default. If you're going to go PnP, I'd recommend using Luigi's PnP code over the BIOS since you can use it to specifically choose your irq and memory address. -- bryan k ogawa <bkogawa@primenet.com> http://www.primenet.com/~bkogawa/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199804181159.EAA19591>