From owner-freebsd-scsi Tue May 2 8:32:40 2000 Delivered-To: freebsd-scsi@freebsd.org Received: from nadia.s.bawue.de (nadia.s.bawue.de [193.197.11.52]) by hub.freebsd.org (Postfix) with ESMTP id 04BB337B978 for ; Tue, 2 May 2000 08:29:22 -0700 (PDT) (envelope-from tf@wurbl.wn.bawue.de) Received: from wurbl.wn.bawue.de (uucp@localhost) by nadia.s.bawue.de (8.9.3/8.9.3) with UUCP id RAA21727 for freebsd.org!freebsd-scsi; Tue, 2 May 2000 17:28:08 +0200 (CEST) Posted-Date: Tue, 2 May 2000 17:28:08 +0200 (CEST) Received: from uucp (helo=prian.bk.int) by wurbl.bk.int with local-esmtp (Exim 3.03 #1) id 12meVh-0001LE-00 for freebsd-scsi@freebsd.org; Tue, 02 May 2000 17:22:54 +0200 Date: Tue, 2 May 2000 17:21:43 +0200 (CEST) From: Thomas Faehnle Subject: sym driver doesn't like 53c810a To: freebsd-scsi@freebsd.org MIME-Version: 1.0 Content-Type: TEXT/plain; CHARSET=US-ASCII Message-Id: Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I'm having trouble getting the sym driver to work with a 53c810a (no-name board), chip rev. 0x11. The board works fine with the ncr driver, however (under both FreeBSD and Linux). I tried both the version that came with the 4.0-RELEASE and 1.5.0 (with and without the XXXX_DEBUG_GENERIC_SUPPORT_XXX option). Output is as follows: 4.0-RELEASE ----------- sym0: <810a> port 0x6000-0x60ff mem 0xe1000000-0xe10000ff irq 15 at device 9.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking pci0: at 11.0 irq 9 [...] unknown2: at port 0x200 on isa0 unknown3: at port 0x300-0x301 on isa0 sym0:8: ERROR (c0:0) (8-0-0) (40/3) @ (script 40:4300001c). sym0: script cmd = f3100004 sym0: regdump: ca 00 00 03 47 40 08 1f 00 08 00 00 80 00 08 02 00 50 e8 03 00 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym-1.5.0 without XXXX_DEBUG_GENERIC_SUPPORT_XXX ------------------------------------------------ sym0: <810a> port 0x6000-0x60ff mem 0xe1000000-0xe10000ff irq 15 at device 9.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking pci0: at 11.0 irq 9 [...] unknown2: at port 0x200 on isa0 unknown3: at port 0x300-0x301 on isa0 sym0:6: ERROR (c0:0) (8-0-0) (40/3) @ (scripta 40:43000030). sym0: script cmd = f3100004 sym0: regdump: ca 00 00 03 47 40 06 1f 00 08 01 00 80 00 08 02 00 60 e8 03 00 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym-1.5.0 with XXXX_DEBUG_GENERIC_SUPPORT_XXX --------------------------------------------- sym0: <810a> port 0x6000-0x60ff mem 0xe1000000-0xe10000ff irq 15 at device 9.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking pci0: at 11.0 irq 9 [...] unknown2: at port 0x200 on isa0 unknown3: at port 0x300-0x301 on isa0 sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 24:c0000000). sym0: script cmd = 980cef10 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 01 00 80 00 08 02 00 50 e6 03 00 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. In all cases the driver hangs, endlessly repeating the last 5 lines. Any clues? Thomas -- Thomas Faehnle, Am Sommerrain 12, D-71522 Backnang | MIME mail welcome mail: tf@wurbl.wn.bawue.de * phone: +49 7191 954671 | PGP key available To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message