Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 06 Feb 2003 08:13:39 -0700
From:      "Lord Sith" <lordsith49@hotmail.com>
To:        alexkono2000@yahoo.com, freebsd-questions@FreeBSD.ORG
Subject:   Re: FreeBSD 5.0 installation, boot: fatal trap 12
Message-ID:  <F45SajWJFSHWsv0yanf00014d01@hotmail.com>

next in thread | raw e-mail | index | archive | help
Have you tried booting without ACPI?

I've had all sorts of problems with FreeBSD's ACPI. In fact, I have yet to 
install it on a box that it doesn't panic, hang or break something.

To do this, interrupt the kernel countdown and then do this:

set hint.acpi.0.disabled=1
boot

>From: Oleksandr Konovalenko <alexkono2000@yahoo.com>
>To: freebsd-questions@FreeBSD.ORG
>Subject: FreeBSD 5.0 installation, boot: fatal trap 12
>Date: Thu, 6 Feb 2003 04:01:33 -0800 (PST)
>Hi!
>
>  During the installation (from CD, I've tried both
>mini-disc and disc1) of FreeBSD 5.0 on my laptop
>Packard Bell iGO2451 (AMD AthlonXP +1500, 1.3GHz) I've
>got following:
>
>...
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16 bit PCCard bus> on vbb0
>
>
>Fatal trap 12: page fault while in kernel mode
>
>fault virtual address  = 0xe7fe6
>fault code             = supervisor read, page not
>present
>instruction pointer    = 0x8:0xc00e9eb5
>stack pointer          = 0x10:0xc0a8299c
>frame pointer          = 0x10:0xc0a8299c
>code segment           = base 0x0, limit 0xfffff, type
>0x16
>                        = DPL 0, pres 1, def32 1, gran
>1
>processor eflags       = interrupt enabled, resume,
>IOPL = 0
>current process        = 0 (swapper)
>trap number            = 12
>panic: page fault
>uptime 1s
>-----------------------------------------
>
>Note#1, there is only one PCMCIA slot in laptop and it
>was empty during the boot.
>
>Note#2, there is no internal floppy drive.
>
>Note#3, No any problem to install NetBSD 1.5.2 or
>Linux RH 7.3 with 2.4.20 kernel.
>
>Note#4, I tried to disable some devices in BIOS but it
>did not help.
>
>Question: what might be wrong?
>
>regards,
>  Alexander K.
>
>
>######## PS: Hardware specifications (from
>http://www.packardbell.se/support/node485.asp):
>
>BIOS v. 1.02
>
>PC Card   Texas Instruments PCI-4410 PC Card
>Controller
>32 bit PC-Card Bus
>
>Video S3 Savage 4S Video Controller
>High-Performance 2D/3D Video Accelerator, integrated
>in mainboard.
>
>Sound Realtek ALC201 Audio System
>18-bit, full duplex AC'97 2.2 compatible stereo audio
>CODEC.
>
>Core VIA Apollo KN133 chipset
>200/266 MHz Front Side Bus, Savage4™ AGP 4X graphics
>core.
>
>Display LCD 14.1'' TFT XGA
>LCD 14.1" TFT XGA
>
>Keyboard and pointing device Synaptics Touchpad
>Touch-sensitive control pad.
>
>4-Way Scrolling Button
>Multi-directional scrolling function
>
>KME UJDA730 Combo Drive
>One drive which can read, write and re-write CD's but
>also reads DVD's. 8x DVD, 8x Write, 4x ReWrite, 20x
>Read.
>
>Memory Memory iGo 2000 series
>     * 1 SO-DIMM Slot
>     * Size: 256 MB
>     * Type: SDRAM (PC133)
>
>
>Modem Billionton MDC56S-I Modem
>V92 MDC interface modem (Smartlink chipset ref.
>HAMR5600-INT)
>
>Network LSI L80227 Network Controller
>100/10 Base T Ethernet integrated in VIA VT8231
>
>
>
>
>__________________________________________________
>Do you Yahoo!?
>Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
>http://mailplus.yahoo.com
>
>To Unsubscribe: send mail to majordomo@FreeBSD.org
>with "unsubscribe freebsd-questions" in the body of the message


_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.  
http://join.msn.com/?page=features/featuredemail


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F45SajWJFSHWsv0yanf00014d01>