Date: Thu, 27 Sep 2007 23:13:31 +0200 From: Marius Nuennerich <marius.nuennerich@gmx.de> To: freebsd-arm@freebsd.org Subject: Re: Comment bug in locore.S? Message-ID: <20070927231331.5d22bf4a@sol.hackerzberg.local> In-Reply-To: <20070927214141.GB15654@ci0.org> References: <20070927171822.0bdec7d9@sol.hackerzberg.local> <20070927170339.GA11021@ci0.org> <20070927224133.5fc9b24f@sol.hackerzberg.local> <20070927214141.GB15654@ci0.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 27 Sep 2007 23:41:41 +0200 Olivier Houchard <mlfbsd@ci0.org> wrote: > On Thu, Sep 27, 2007 at 10:41:33PM +0200, Marius Nuennerich wrote: > > On Thu, 27 Sep 2007 19:03:39 +0200 > > Olivier Houchard <mlfbsd@ci0.org> wrote: > > > > > On Thu, Sep 27, 2007 at 05:18:22PM +0200, Marius Nuennerich wrote: > > > > Hi all, > > > > > > > > > > Hi Marius, > > > > > > > I'm still trying to boot FreeBSD on the neo1973. So far I managed to > > > > put bytes over the serial console so I can see where I am. At the > > > > moment the (virtual) machine crashes in locore.S (1.16) line 170: > > > > ldr pc, .Lvirt_done > > > > > > > > qemu: fatal: Trying to execute code outside RAM or ROM at 0xc0008??? > > > > > > > > Which I don't understand because the section should be mapped by the > > > > MMU to 0x30008??? at that time. > > > > > > > > In line 137 the sequence in the comment is described as > > > > /* # of sections, PA|attr, VA */ > > > > but in line 185 the order is > > > > n_sec, VA, PA|attr > > > > > > > > Is the comment wrong? > > > > > > > > > > No the comment is right, 0xc0000000 should be mapped. > > > Did you define STARTUP_PAGETABLE_ADDR ? It's not marked as such, but it is > > > mandatory now. > > > > Yes, in the kernel config there are these lines: > > makeoptions KERNPHYSADDR=0x30008000 > > makeoptions KERNVIRTADDR=0xc0000000 > > options KERNPHYSADDR=0x30008000 > > options KERNVIRTADDR=0xc0000000 > > options PHYSADDR=0x30000000 > > options STARTUP_PAGETABLE_ADDR=0x30800000 > > > > It's from Andrew Turners config file which he posted on > > http://wiki.openmoko.org/wiki/FreeBSD > > in the tarball. > > > > Hmmm, I really see no reason why the PA <=> PA mapping would work, but not > the VA <=> PA one. > I'll try to setup qemu. Can it provide useful informations about its > internal state, ie CPU registers, TLB, etc ? Yes, it looks like this: qemu: fatal: Trying to execute code outside RAM or ROM at 0xc0008030 R00=30800000 R01=c01afdb8 R02=c0000070 R03=00000000 R04=3000824c R05=3000808c R06=00000002 R07=30008050 R08=33f17fdc R09=00000000 R10=00000041 R11=50000020 R12=33f14934 R13=c019b140 R14=33f8b9e8 R15=c0008030 PSR=60000153 -ZC- A svc32 s00=00000000( 0) s01=00000000( 0) d00=0000000000000000( 0) s02=00000000( 0) s03=00000000( 0) d01=0000000000000000( 0) s04=00000000( 0) s05=00000000( 0) d02=0000000000000000( 0) s06=00000000( 0) s07=00000000( 0) d03=0000000000000000( 0) s08=00000000( 0) s09=00000000( 0) d04=0000000000000000( 0) s10=00000000( 0) s11=00000000( 0) d05=0000000000000000( 0) s12=00000000( 0) s13=00000000( 0) d06=0000000000000000( 0) s14=00000000( 0) s15=00000000( 0) d07=0000000000000000( 0) s16=00000000( 0) s17=00000000( 0) d08=0000000000000000( 0) s18=00000000( 0) s19=00000000( 0) d09=0000000000000000( 0) s20=00000000( 0) s21=00000000( 0) d10=0000000000000000( 0) s22=00000000( 0) s23=00000000( 0) d11=0000000000000000( 0) s24=00000000( 0) s25=00000000( 0) d12=0000000000000000( 0) s26=00000000( 0) s27=00000000( 0) d13=0000000000000000( 0) s28=00000000( 0) s29=00000000( 0) d14=0000000000000000( 0) s30=00000000( 0) s31=00000000( 0) d15=0000000000000000( 0) FPSCR: 00000000 Can someone explain to me what the sxx= and dxx= value mean? Regards, Marius
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070927231331.5d22bf4a>