Date: Sun, 28 Oct 2007 23:06:37 +0300 From: Yuri Pankov <yuri.pankov@gmail.com> To: Thiago Pollachini <grayfoxbsd@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: Compiling freebsd7 kernel Message-ID: <1193601997.30478.3.camel@darklight.org.ru> In-Reply-To: <bf47a8580710281226g1db50963hd7d5cdda7b3cfcc9@mail.gmail.com> References: <bf47a8580710281226g1db50963hd7d5cdda7b3cfcc9@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 2007-10-28 at 16:26 -0300, Thiago Pollachini wrote: > Hi folks! > This is my feedback about the new freebsd7... > > ------------------- cut here ---------------------- > freebsd7# cat /usr/src/sys/i386/conf/GrayFox > cpu I686_CPU > ident GrayFox > > options SCHED_ULE # 4BSD scheduler > options PREEMPTION # Enable kernel thread preemption > options INET # InterNETworking > options INET6 # InterNETworking6 > options SCTP # Stream Control Transmission > Protocol > options FFS # Berkeley Fast Filesystem > options SOFTUPDATES # Enable FFS soft updates support > options UFS_ACL # Support for access control lists > options UFS_DIRHASH # Improve performance on big > directories > options UFS_GJOURNAL # Enable gjournal-based UFS > journaling > options CD9660 # ISO 9660 Filesystem > options PROCFS # Process filesystem (requires > PSEUDOFS) > options PSEUDOFS # Pseudo-filesystem framework > options GEOM_PART_GPT # GUID Partition Tables. > options GEOM_LABEL # Provides labelization > options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] > options COMPAT_FREEBSD4 # Compatible with FreeBSD4 > options COMPAT_FREEBSD5 # Compatible with FreeBSD5 > options COMPAT_FREEBSD6 # Compatible with FreeBSD6 > options SYSVSHM # SYSV-style shared memory > options SYSVMSG # SYSV-style message queues > options SYSVSEM # SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time > extensions > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > options ADAPTIVE_GIANT # Giant mutex is adaptive. > options STOP_NMI # Stop CPUS using NMI instead of IPI > options AUDIT # Security event auditing > > # CPU frequency control > device cpufreq > > # Bus support. > device eisa > device pci > > # ATA and ATAPI devices > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > options ATA_STATIC_ID # Static device numbering > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > > device kbdmux # keyboard multiplexer > > device vga # VGA video card driver > > # syscons is the default console driver, resembling an SCO console > device sc > > device agp # support several AGP chipsets > > # Power management support (see NOTES for more options) > #device apm > # Add suspend/resume support for the i8254. > device pmtimer > > # PCCARD (PCMCIA) support > # PCMCIA and cardbus bridge support > device cbb # cardbus (yenta) bridge > device pccard # PC Card (16-bit) bus > device cardbus # CardBus (32-bit) bus > > # Serial (COM) ports > device sio # 8250, 16[45]50 based serial ports > > # Parallel port > device ppc > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > > device miibus # MII bus support > device dc # DEC/Intel 21143 and various workalikes > device fxp # Intel EtherExpress PRO/100B (82557, 82558) > device rl # RealTek 8129/8139 > device sis # Silicon Integrated Systems SiS 900/SiS > 7016 > device vr # VIA Rhine, Rhine II > device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # Wireless NIC cards > device wlan # 802.11 support > device wlan_wep # 802.11 WEP support > device wlan_ccmp # 802.11 CCMP support > device wlan_tkip # 802.11 TKIP support > device wlan_amrr # AMRR transmit rate control algorithm > device wlan_scan_ap # 802.11 AP mode scanning > device wlan_scan_sta # 802.11 STA mode scanning > device an # Aironet 4500/4800 802.11 wireless NICs. > device ath # Atheros pci/cardbus NIC's > device ath_hal # Atheros HAL (Hardware Access Layer) > device ath_rate_sample # SampleRate tx rate control for ath > device ral # Ralink Technology RT2500 wireless NICs. > device wi # WaveLAN/Intersil/Symbol 802.11 wireless > NICs. > > # Pseudo devices. > device loop # Network loopback > device random # Entropy device > device ether # Ethernet support > device pty # Pseudo-ttys (telnet etc) > device firmware # firmware assist module > > # The `bpf' device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > # Note that 'bpf' is required for DHCP. > device bpf # Berkeley packet filter > > options IPFIREWALL #firewall > options IPFIREWALL_VERBOSE #enable logging to syslogd(8) > options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default > options IPFIREWALL_FORWARD #packet destination changes > options IPFIREWALL_NAT #ipfw kernel nat support ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ from /sys/conf/NOTES: # IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires # LIBALIAS. > ##options IPDIVERT #divert sockets > options IPSTEALTH #support for stealth forwarding > options DUMMYNET > options HZ=1000 > > > > #device pf #PF OpenBSD packet-filter firewall > #device pflog #logging support interface for PF > #device pfsync > #options ALTQ > #options ALTQ_CBQ # Class Bases Queueing > #options ALTQ_RED # Random Early Detection > #options ALTQ_RIO # RED In/Out > #options ALTQ_HFSC # Hierarchical Packet Scheduler > #options ALTQ_CDNR # Traffic conditioner > ##options ALTQ_PRIQ # Priority Queueing > freebsd7# > -------------------------------cut here--------------------------- > After make depend and on the final of make when is linking the kernel with > pf, altq and ipdivert enabled these errors appears. > Note: I've disabled them (pf,altq and ipdivert) and even.... you see.... > > > --------------------------cut----------- > linking kernel > ip_fw2.o(.text+0x317): In function `del_redir_spool_cfg': > : undefined reference to `LibAliasRedirectDelete' > ip_fw2.o(.text+0x1b83): In function `ipfw_destroy': > : undefined reference to `LibAliasUninit' > ip_fw2.o(.text+0x23b3): In function `ipfw_ctl': > : undefined reference to `LibAliasSetMode' > ip_fw2.o(.text+0x23cb): In function `ipfw_ctl': > : undefined reference to `LibAliasSetAddress' > ip_fw2.o(.text+0x2578): In function `ipfw_ctl': > : undefined reference to `LibAliasAddServer' > ip_fw2.o(.text+0x281a): In function `ipfw_ctl': > : undefined reference to `LibAliasUninit' > ip_fw2.o(.text+0x2ec6): In function `ipfw_ctl': > : undefined reference to `LibAliasRedirectPort' > ip_fw2.o(.text+0x2f4a): In function `ipfw_ctl': > : undefined reference to `LibAliasRedirectAddr' > ip_fw2.o(.text+0x2f8e): In function `ipfw_ctl': > : undefined reference to `LibAliasRedirectProto' > ip_fw2.o(.text+0x3db2): In function `ipfw_ctl': > : undefined reference to `LibAliasInit' > ip_fw2.o(.text+0x3f44): In function `ifaddr_change': > : undefined reference to `LibAliasSetAddress' > ip_fw2.o(.text+0x4879): In function `ipfw_chk': > : undefined reference to `m_megapullup' > ip_fw2.o(.text+0x48d2): In function `ipfw_chk': > : undefined reference to `LibAliasOut' > ip_fw2.o(.text+0x6c07): In function `ipfw_chk': > : undefined reference to `LibAliasIn' > *** Error code 1 > ------------------------cut--------------------- > > > That's all.... > Regards! > > Thiago Pollachini HTH, Yuri
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1193601997.30478.3.camel>