Date: Thu, 14 Aug 2014 14:59:28 +0100 From: Karl Pielorz <kpielorz_lst@tdx.co.uk> To: freebsd-hackers@freebsd.org Subject: BTX halted on Proliant DL320 Gen8 v2's - fakeRAID support? Message-ID: <E98BC833A8A6202FF2D84A34@Mail-PC.tdx.co.uk>
next in thread | raw e-mail | index | archive | help
Hi,
On our HP DL320 Gen8 v2's - BTX halts if we try to boot with the onboard
SATA controller set to 'B120i RAID' mode, and have drives present (output
from BTX is below).
If you boot with *no drives* present - it works, and does show from pciconf
-lv:
ahci0@pci0:0:31:2: class=0x010400 card=0x00841590 chip=0x8c048086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point SATA Controller 1 [RAID mode]'
subclass = RAID
But with drives present BTX dies on 9.x, 10.x and a recent 11.x snapshot.
Is this controller supported in 'raid' mode? - i.e. if it got past BTX
would it be usable?
-Karl
BTX output (from 10.0-R-amd64 boot)
"
Loading /boot/defaults/loader.conf
\
int=00000008 err=0001681b efl=0007b7a0 eip=0000002b
eax=adadf9a8 ebx=adaf5630 ecx=adae3da4 edx=adaf5a38
esi=0007b7b8 edi=00000000 ebp=0007b9a0 esp=00000033
cs=0202 ds=0033 es=0033 fs=0033 gs=0033 ss=0000
cs:eip=00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00
ss:esp=f0 d0 9b 00 f0 08 ef 00-f0 6c 50 24 8b 50 0b 00
c0 4d f8 00 f0 05 ec 00-f0 f3 05 00 e8 8a 5e 00
BTX halted
"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E98BC833A8A6202FF2D84A34>