Date: Thu, 20 Oct 2005 13:16:00 -0700 From: "Moore, Robert" <robert.moore@intel.com> To: "Mathieu Prevot" <mathieu_prevot@yahoo.fr>, <freebsd-acpi@freebsd.org> Subject: RE: ACPI errors on amd64 (sempron) Message-ID: <971FCB6690CD0E4898387DBF7552B90E0323D759@orsmsx403.amr.corp.intel.com>
next in thread | raw e-mail | index | archive | help
This exception comes from one place:
#ifndef ACPI_MISALIGNED_TRANSFERS
/*
* Hardware does not support non-aligned data transfers, we must
verify
* the request.
*/
(void) AcpiUtShortDivide ((ACPI_INTEGER) Address, Length, NULL,
&Remainder);
if (Remainder !=3D 0)
{
return_ACPI_STATUS (AE_AML_ALIGNMENT);
}
#endif
I think that ACPI_MISALIGNED_TRANSFERS is not set in the 64-bit case;
this may not be necessary for amd64.
> -----Original Message-----
> From: owner-freebsd-acpi@freebsd.org [mailto:owner-freebsd-
> acpi@freebsd.org] On Behalf Of Mathieu Prevot
> Sent: Thursday, October 20, 2005 12:56 PM
> To: freebsd-acpi@freebsd.org
> Subject: ACPI errors on amd64 (sempron)
>=20
> It is probably known but it occurs in 6.0RC1-AMD64-GENERIC
>=20
>=20
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-RC1 #0: Sun Oct 9 20:36:12 UTC 2005
> root@rat.samsco.home:/usr/obj/usr/src/sys/GENERIC
> ACPI APIC Table: <VIAK8 AWRDACPI>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Sempron(tm) Processor 2600+ (1607.40-MHz K8-class CPU)
> Origin =3D "AuthenticAMD" Id =3D 0x20fc2 Stepping =3D 2
>=20
>
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,
> MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
> Features2=3D0x1<SSE3>
> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
> real memory =3D 469696512 (447 MB)
> avail memory =3D 441864192 (421 MB)
> ioapic0 <Version 0.3> irqs 0-23 on motherboard
> acpi0: <VIAK8 AWRDACPI> on motherboard
> acpi0: Power Button (fixed)
> ACPI-0501: *** Error: Handler for [SystemMemory] returned
> AE_AML_ALIGNMENT
> ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
> (Node 0xffffff00000908c0), AE_AML_ALIGNMENT
> ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
> (Node 0xffffff00000908c0), AE_AML_ALIGNMENT
> can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT
> ACPI-0501: *** Error: Handler for [SystemMemory] returned
> AE_AML_ALIGNMENT
> ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0._CRS]
> (Node 0xffffff00000905c0), AE_AML_ALIGNMENT
> ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS]
> (Node 0xffffff00000905c0), AE_AML_ALIGNMENT
> can't fetch resources for \\_SB_.PCI0 - AE_AML_ALIGNMENT
> pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0
> pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
> pci_link3: <ACPI PCI Link LNKD> on acpi0
> pci_link4: <ACPI PCI Link LNKE> on acpi0
> pci_link5: <ACPI PCI Link LNKF> on acpi0
> pci_link6: <ACPI PCI Link LNK0> on acpi0
> pci_link7: <ACPI PCI Link LNK1> on acpi0
> pci_link8: <ACPI PCI Link ALKA> irq 0 on acpi0
> pci_link9: <ACPI PCI Link ALKB> irq 0 on acpi0
> pci_link10: <ACPI PCI Link ALKC> irq 0 on acpi0
> pci_link11: <ACPI PCI Link ALKD> irq 0 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci_link9: BIOS IRQ 11 for -2145774744.16.INTA is invalid
> pci_link9: BIOS IRQ 5 for -2145774744.16.INTB is invalid
> pci_link9: BIOS IRQ 10 for -2145774744.16.INTC is invalid
> pci_link10: BIOS IRQ 10 for -2145774744.17.INTC is invalid
> pci_link11: BIOS IRQ 11 for -2145774744.18.INTA is invalid
> pci0: <ACPI PCI bus> on pcib0
> agp0: <VIA 8380 host to PCI bridge> mem 0xe0000000-0xe3ffffff at
> device 0.0 on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> atapci0: <VIA 8237 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 15.0 on
pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at
> device 16.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at
> device 16.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <VIA 83C572 USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at
> device 16.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <VIA 83C572 USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at
> device 16.3 on pci0
> uhci3: [GIANT-LOCKED]
> usb3: <VIA 83C572 USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <VIA VT6202 USB 2.0 controller> mem 0xea000000-0xea0000ff irq
> 21 at device 16.4 on pci0
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <VIA VT6202 USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> isab0: <PCI-ISA bridge> at device 17.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <multimedia, audio> at device 17.5 (no driver attached)
> vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem
> 0xea001000-0xea0010ff irq 23 at device 18.0 on pci0
> miibus0: <MII bus> on vr0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> vr0: Ethernet address: 00:14:85:51:39:80
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> orm0: <ISA Option ROM> at iomem 0xcc000-0xd3fff on isa0
> ppc0: cannot reserve I/O port range
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=3D0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass
> 3/1
> ums0: 3 buttons and Z dir.
> Timecounter "TSC" frequency 1607402061 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 152626MB <Seagate ST3160023A 3.06> at ata0-master UDMA100
> acd0: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-master UDMA33
> acd1: CDRW <PLEXTOR CD-R PX-W5224A/1.03> at ata1-slave UDMA33
> Trying to mount root from ufs:/dev/ad0s1a
> umass0: LEXAR MEDIA JUMPDRIVE SPORT, rev 2.00/20.00, addr 2
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <LEXAR JUMPDRIVE SPORT 1000> Removable Direct Access SCSI-0
device
> da0: 40.000MB/s transfers
> da0: 989MB (2026592 512 byte sectors: 64H 32S/T 989C)
>=20
>=20
> _______________________________________________
> freebsd-acpi@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
> To unsubscribe, send any mail to
"freebsd-acpi-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?971FCB6690CD0E4898387DBF7552B90E0323D759>