Date: Mon, 18 May 2020 18:10:41 -0400 From: David Mehler <dave.mehler@gmail.com> To: bob prohaska <fbsd@www.zefox.net> Cc: freebsd-arm@freebsd.org Subject: Re: FreeBSD 12.1 on Raspberry Pi 3B+, completely headless? Message-ID: <CAPORhP70pXC-_o_us4crY3wdfvRxNM1%2BnTiE220Bwf7SaBtkXg@mail.gmail.com> In-Reply-To: <20200518213741.GA65006@www.zefox.net> References: <CAPORhP4wTqc0xZLatb=K0TozrAYogE7qXQ6Bw5WAynhAzW-QPQ@mail.gmail.com> <20200518184007.GA64715@www.zefox.net> <CAPORhP6gqvp_MSxsO9__C-EvXcEpRfVwYW1HnujFL_TpNXnNfw@mail.gmail.com> <20200518213741.GA65006@www.zefox.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, Thanks for the confirmation that onboard ethernet works. I've booted the pi and I'm not seeing it on the network. I've tried mounting the freebsd partition under a linux virtual machine which it's fdisk shows it as /dev/sdd2 later in the display shows it up as 15. I can not get it to mount so am not sure what rc.conf is doing, I was hoping it would get a dhcp address since it's plugged directly in. I also did add a blank ssh file to the /dev/sdd1 partition. Suggestions? Thanks. Dave. On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: > On Mon, May 18, 2020 at 05:25:40PM -0400, David Mehler wrote: >> Hello, >> >> Does the onboard ethernet on the pi 3b+ work or do I have to go USB >> wireless all the way? >> > Wired ethernet works fine on the 3B, I believe the + is the same. > > hth, > > bob prohaska > >> Thanks. >> Dave. >> >> >> On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: >> > On Mon, May 18, 2020 at 01:02:32PM -0400, David Mehler wrote: >> >> Hello, >> >> >> >> I've got a Raspberry Pi 3b+ that I'd like to put FreeBSD 12.1 on. It >> >> is completely headless the only thing it has is it's power connection. >> >> I have downloaded and wrote to sd the latest 12.1 amd64 rpi3 image. >> > ^^^ >> > Typo? >> > >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPORhP70pXC-_o_us4crY3wdfvRxNM1%2BnTiE220Bwf7SaBtkXg>