Date: Fri, 8 Feb 2002 08:48:39 -0500 From: Brian T.Schellenberger <bts@babbleon.org> To: freebsd-questions@freebsd.org, freebsd-scsi@freebsd.org Subject: USB drive -- problems Message-ID: <20020208134839.39C89407F@i8k.babbleon.org>
next in thread | raw e-mail | index | archive | help
Ok, with little confidence it would work, since I could find no very good
info on USB & FreeBSD, and there was no response to my query on the subject,
I decided in a "what the hell" moment to get a USB drive and see what
happened.
I have a LaCie 80G drive. It was $250 for 80, USB 2, and if it works it
should be pretty darn cool.
It is recognized by the kernel, so I thought I was doing pretty well, but
when I try to actually do anything with it, I run into trouble. Here are
some messages from /var/log messages, first hte successful boot stuff and
then the failure messages:
Feb 3 04:31:21 i8k /kernel: uhci0: <Intel 82801BA/BAM (ICH2) USB controller
USB-A> port 0xbce0-0xbcff irq 11 at device 31.2 on pci0
Feb 3 04:31:21 i8k /kernel: usb0: <Intel 82801BA/BAM (ICH2) USB controller
USB-A> on uhci0
Feb 3 04:31:21 i8k /kernel: usb0: USB revision 1.0
Feb 3 04:31:21 i8k /kernel: uhub0: Intel UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
Feb 3 04:31:21 i8k /kernel: uhub0: 2 ports with 2 removable, self powered
Feb 3 04:31:21 i8k /kernel: umass0: LaCie LaCie StudioDrive USB2 ,
rev 2.00/10.06, addr 2
:
:
Feb 3 04:31:21 i8k /kernel: da0 at umass-sim0 bus 0 target 0 lun 0
Feb 3 04:31:22 i8k /kernel: da0: <Maxtor 4 D080H4 DAH0> Fixed Direct Access
SCSI-0 device
Feb 3 04:31:22 i8k /kernel: da0: 650KB/s transfers
Feb 3 04:31:22 i8k /kernel: da0: 78167MB (160086528 512 byte sectors: 64H
32S/T 12631C)
:
:
Feb 3 05:08:48 i8k /kernel: (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 1
0
Feb 3 05:08:48 i8k /kernel: (da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:21,0
Feb 3 05:08:48 i8k /kernel: (da0:umass-sim0:0:0:0): Logical block address
out of range
Feb 3 05:08:57 i8k /kernel: (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 1
0
Feb 3 05:08:57 i8k /kernel: (da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:21,0
Feb 3 05:08:57 i8k /kernel: (da0:umass-sim0:0:0:0): Logical block address
out of range
The set of error messages above were returned when I did a simple
dd if=/dev/da0
On the other hand, I *can* actually do an fdisk and it will at least tell me
that I have an 80G drive, so clearly *some* level of i/o must be working.
Any ideas? Please?
--
Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work)
Brian, the man from Babble-On . . . . bts@babbleon.org (personal)
ME --> http://www.babbleon.org
http://www.eff.org <-- GOOD GUYS --> http://www.programming-freedom.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020208134839.39C89407F>