Date: Fri, 19 Jul 2002 16:33:24 +0200 From: Peter Urban <p.urban@fh-amberg-weiden.de> To: questions@freebsd.org Subject: Sound on Intel i815 Message-ID: <3D382334.8070203@fh-amberg-weiden.de>
next in thread | raw e-mail | index | archive | help
Hi, I use FreeBSD, 4.6 release on an Acer TravelMate613TXC notebook. My feeling is, it is superior compared to Linux!! I only have a problem with the sound card (Intel i815): If I load the corresponding module into the kernel (I'm using the standard kernel without modification) I get the following response from dmesg: 195# kldload snd_ich.ko 195# dmesg | grep pcm pcm0: <Intel 82801BA (ICH2)> irq 10 at device 31.5 on pci0 pcm0: unable to map IO port space device_probe_and_attach: pcm0 attach returned 6 195# During booting the soundcard probably appears as pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 10 on line 66. The complete log is: Jul 19 15:59:04 195 /kernel: Copyright (c) 1992-2002 The FreeBSD Project. Jul 19 15:59:04 195 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Jul 19 15:59:04 195 /kernel: The Regents of the University of California. All rights reserved. Jul 19 15:59:04 195 /kernel: FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002 Jul 19 15:59:04 195 /kernel: murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC Jul 19 15:59:04 195 /kernel: Timecounter "i8254" frequency 1193182 Hz Jul 19 15:59:04 195 /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (997.82-MHz 686-class CPU) Jul 19 15:59:04 195 /kernel: Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Jul 19 15:59:04 195 /kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Jul 19 15:59:04 195 /kernel: real memory = 266797056 (260544K bytes) Jul 19 15:59:04 195 /kernel: config> di sn0 Jul 19 15:59:04 195 /kernel: config> di lnc0 Jul 19 15:59:04 195 /kernel: config> di ie0 Jul 19 15:59:04 195 /kernel: config> di fe0 Jul 19 15:59:04 195 /kernel: config> di ed0 Jul 19 15:59:04 195 /kernel: config> di cs0 Jul 19 15:59:04 195 /kernel: config> di fdc0 Jul 19 15:59:04 195 /kernel: config> di bt0 Jul 19 15:59:04 195 /kernel: config> di aic0 Jul 19 15:59:04 195 /kernel: config> di aha0 Jul 19 15:59:04 195 /kernel: config> di adv0 Jul 19 15:59:04 195 /kernel: config> q Jul 19 15:59:04 195 /kernel: avail memory = 254627840 (248660K bytes) Jul 19 15:59:04 195 /kernel: Preloaded elf kernel "kernel" at 0xc04db000. Jul 19 15:59:04 195 /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc04db09c. Jul 19 15:59:04 195 /kernel: Preloaded elf module "agp.ko" at 0xc04db0ec. Jul 19 15:59:04 195 /kernel: Pentium Pro MTRR support enabled Jul 19 15:59:04 195 /kernel: md0: Malloc disk Jul 19 15:59:04 195 /kernel: Using $PIR table, 7 entries at 0xc00fdf50 Jul 19 15:59:04 195 /kernel: npx0: <math processor> on motherboard Jul 19 15:59:04 195 /kernel: npx0: INT 16 interface Jul 19 15:59:04 195 /kernel: pcib0: <Host to PCI bridge> on motherboard Jul 19 15:59:04 195 /kernel: pci0: <PCI bus> on pcib0 Jul 19 15:59:04 195 /kernel: agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0 Jul 19 15:59:04 195 /kernel: pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 Jul 19 15:59:04 195 /kernel: pci1: <PCI bus> on pcib1 Jul 19 15:59:04 195 /kernel: fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xf4100000-0xf4100fff irq 11 at device 8.0 on pci1 Jul 19 15:59:04 195 /kernel: fxp0: Ethernet address 00:00:e2:5e:04:52 Jul 19 15:59:04 195 /kernel: inphy0: <i82562ET 10/100 media interface> on miibus0 Jul 19 15:59:04 195 /kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jul 19 15:59:04 195 /kernel: pcic0: <O2micro 6933 PCI-Cardbus Bridge> irq 11 at device 15.0 on pci1 Jul 19 15:59:04 195 /kernel: pcic0: PCI Memory allocated: 0x44000000 Jul 19 15:59:04 195 /kernel: pcic0: Warning: O2micro OZ68xx chips may not work Jul 19 15:59:04 195 /kernel: pccard0: <PC Card bus (classic)> on pcic0 Jul 19 15:59:04 195 /kernel: pcic1: <O2micro 6933 PCI-Cardbus Bridge> irq 11 at device 15.1 on pci1 Jul 19 15:59:04 195 /kernel: pcic1: PCI Memory allocated: 0x44001000 Jul 19 15:59:04 195 /kernel: pcic1: Warning: O2micro OZ68xx chips may not work Jul 19 15:59:04 195 /kernel: pccard1: <PC Card bus (classic)> on pcic1 Jul 19 15:59:04 195 /kernel: isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0 Jul 19 15:59:04 195 /kernel: isa0: <ISA bus> on isab0 Jul 19 15:59:04 195 /kernel: atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1 on pci0 Jul 19 15:59:04 195 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Jul 19 15:59:04 195 /kernel: ata1: at 0x170 irq 15 on atapci0 Jul 19 15:59:04 195 /kernel: uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f irq 10 at device 31.2 on pci0 Jul 19 15:59:04 195 /kernel: usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 Jul 19 15:59:04 195 /kernel: usb0: USB revision 1.0 Jul 19 15:59:04 195 /kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jul 19 15:59:04 195 /kernel: uhub0: 2 ports with 2 removable, self powered Jul 19 15:59:04 195 /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10 Jul 19 15:59:04 195 /kernel: uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x1840-0x185f irq 11 at device 31.4 on pci0 Jul 19 15:59:04 195 /kernel: usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 Jul 19 15:59:04 195 /kernel: usb1: USB revision 1.0 Jul 19 15:59:04 195 /kernel: uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jul 19 15:59:04 195 /kernel: uhub1: 2 ports with 2 removable, self powered Jul 19 15:59:04 195 /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 10 Jul 19 15:59:04 195 /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2446) at 31.6 irq 10 Jul 19 15:59:04 195 /kernel: orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xe0000-0xe0fff on isa0 Jul 19 15:59:04 195 /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Jul 19 15:59:04 195 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Jul 19 15:59:04 195 /kernel: kbd0 at atkbd0 Jul 19 15:59:04 195 /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Jul 19 15:59:04 195 /kernel: psm0: model IntelliMouse Explorer, device ID 4 Jul 19 15:59:04 195 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jul 19 15:59:04 195 /kernel: sc0: <System console> at flags 0x100 on isa0 Jul 19 15:59:04 195 /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jul 19 15:59:04 195 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Jul 19 15:59:04 195 /kernel: sio0: type 16550A Jul 19 15:59:04 195 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Jul 19 15:59:04 195 /kernel: sio1: type 16550A Jul 19 15:59:04 195 /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Jul 19 15:59:04 195 /kernel: ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode Jul 19 15:59:04 195 /kernel: plip0: <PLIP network interface> on ppbus0 Jul 19 15:59:04 195 /kernel: lpt0: <Printer> on ppbus0 Jul 19 15:59:04 195 /kernel: lpt0: Interrupt-driven port Jul 19 15:59:04 195 /kernel: ppi0: <Parallel I/O> on ppbus0 Jul 19 15:59:04 195 /kernel: ata1-slave: ATAPI identify retries exceeded Jul 19 15:59:04 195 /kernel: pccard: card inserted, slot 1 Jul 19 15:59:04 195 /kernel: pccard: card removed, slot 1 Jul 19 15:59:04 195 /kernel: ad0: 19077MB <IC25N020ATDA04-0> [38760/16/63] at ata0-master UDMA100 Jul 19 15:59:04 195 /kernel: acd0: CD-RW <UJDA710> at ata1-master PIO4 Jul 19 15:59:04 195 /kernel: Mounting root from ufs:/dev/ad0s4a Jul 19 15:59:04 195 /kernel: pccard: card inserted, slot 1 Jul 19 15:59:12 195 login: ROOT LOGIN (root) ON ttyv0 Has somebody an advice? Thank you To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D382334.8070203>