Date: Mon, 2 Apr 2001 16:11:57 -0300 (ADT) From: The Hermit Hacker <scrappy@hub.org> To: <freebsd-smp@freebsd.org> Cc: <freebsd-stable@freebsd.org> Subject: IBM PC Server 704 ... dual pentium pro ... Message-ID: <Pine.BSF.4.33.0104021600150.91376-100000@mobile.hub.org>
next in thread | raw e-mail | index | archive | help
Anyone have any experiences iwth one of these? we've had it here, running
Dual with Solaris/x86, for the past two years. They upgraded the machine,
and plan on using this one for a database server for one of their
projects, so we installed FreeBSD 4.3-RC onto it ... but it appears to
'hang' periodically ...
funny thing is that dmesg and /var/run/dmesg.boot show pretty much
'garbage':
aittdb# dmesg
num/raid:
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xff00-0xff3f mem 0xfe900000-0xfe9fffff,0xfeaff000-0xfeafffff irq 2 at device 11.0 on pci0
fxp0: Ethernet address 00:d0:b7:bb:8c:63
aittdb# cat /var/run/dmesg.boot
OWNER=root MODE=100644
aittdb#
/var/log/messages shows from a few days ago shows, if anything stands out
in here?
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RC #1: Fri Mar 30 15:04:03 AST 2001
root@demeter.acadiau.ca:/usr/obj/usr/src/sys/aittdb
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (198.95-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 536870912 (524288K bytes)
avail memory = 519921664 (507736K bytes)
APIC_IO: MP table broken: 8259->APIC entry missing!
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfec08000
io0 (APIC): apic id: 14, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 13, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc02d4000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> on motherboard
IOAPIC #1 intpin 0 -> irq 2
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x1229) at 11.0 irq 2
isab0: <Intel 82375EB PCI-EISA bridge> at device 14.0 on pci0
isa0: <ISA bus> on isab0
chip0: <> mem 0xfffffc00-0xffffffff,0xfffffc00-0xffffffff,0xfffffc00-0xffffffff,0xfffffc00-0xffffffff,0xfffffc00-0xffffffff,0xfec01000-0xfec013ff at device 15.0 on pci0
chip1: <Intel 82453KX/GX (Orion) PCI memory controller> at device 20.0 on pci0
pcib1: <Intel 82454KX/GX (Orion) host to PCI bridge> on motherboard
IOAPIC #1 intpin 12 -> irq 16
IOAPIC #1 intpin 13 -> irq 17
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xec00-0xecff mem 0xfe1ff000-0xfe1fffff irq 16 at device 11.0 on pci1
ahc0: Using left over BIOS settings
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xfe1fe000-0xfe1fefff irq 17 at device 12.0 on pci1
ahc1: Using left over BIOS settings
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
acd0: CDROM <CD-ROM CDU311> at ata0-master using BIOSPIO
Waiting 2 seconds for SCSI devices to settle
pass0 at ahc0 bus 0 target 6 lun 0
pass0: <ESG-SHV SCA HSBP M1 1.05> Fixed Processor SCSI-2 device
pass0: 3.300MB/s transfers
pass4 at ahc1 bus 0 target 6 lun 0
pass4: <ESG-SHV SCA HSBP M1 1.05> Fixed Processor SCSI-2 device
pass4: 3.300MB/s transfers
Mounting root from ufs:/dev/da0s1a
da4 at ahc1 bus 0 target 9 lun 0
da4: <IBM DCHS04Y 2828> Fixed Direct Access SCSI-2 device
da4: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da4: 4303MB (8813870 512 byte sectors: 64H 32S/T 4303C)
da0 at ahc0 bus 0 target 8 lun 0
da0: <IBM DCHS04Y 2828> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4303MB (8813870 512 byte sectors: 64H 32S/T 4303C)
da1 at ahc0 bus 0 target 9 lun 0
da1: <IBM DCHS04Y 2828> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4303MB (8813870 512 byte sectors: 64H 32S/T 4303C)
da2 at ahc0 bus 0 target 10 lun 0
da2: <IBM DCHS04Y 2828> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 4303MB (8813870 512 byte sectors: 64H 32S/T 4303C)
da3 at ahc1 bus 0 target 8 lun 0
da3: <IBM DCHS04Y 2828> Fixed Direct Access SCSI-2 device
da3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da3: 4303MB (8813870 512 byte sectors: 64H 32S/T 4303C)
da5 at ahc1 bus 0 target 10 lun 0
da5: <IBM DCHS04Y 2828> Fixed Direct Access SCSI-2 device
da5: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da5: 4303MB (8813870 512 byte sectors: 64H 32S/T 4303C)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xff00-0xff3f mem 0xfe900000-0xfe9fffff,0xfeaff000-0xfeafffff irq 2 at device 11.0 on pci0
fxp0: Ethernet address 00:d0:b7:bb:8c:63
the kernel compile was on:
aittdb# uname -a
FreeBSD aittdb.acadiau.ca 4.3-RC FreeBSD 4.3-RC #1: Fri Mar 30 15:04:03 AST 2001 root@demeter.acadiau.ca:/usr/obj/usr/src/sys/aittdb i386
and we're using vinum, in the following configuration, to give us a RAID5 array:
aittdb# cat /root/vinum.cfg
drive d1 device /dev/da1s1a
drive d2 device /dev/da4s1a
drive d3 device /dev/da2s1a
drive d4 device /dev/da5s1a
volume raid
plex org raid5 479k
sd size 0 drive d1
sd size 0 drive d2
sd size 0 drive d3
sd size 0 drive d4
the last 'hang' happened when we tried to install jdk12-beta ... I'd say
its whenever there is heavy disk I/O, but when it first started happened,
and we'd run top, all the numbers came in pretty much as zero ...
thoughts as to where to look? known problems with these machiens?
Thanks ...
Marc G. Fournier ICQ#7615664 IRC Nick: Scrappy
Systems Administrator @ hub.org
primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0104021600150.91376-100000>