Date: Sat, 7 Oct 2000 15:44:04 -0800 From: Kirk Brogdon <kirk@alaptech.com> To: freebsd-questions@freebsd.org Subject: X problems after 4.1 upgrade - Cirrus 5446 Message-ID: <20001007154404.A366@bsd1.alaptech.com>
next in thread | raw e-mail | index | archive | help
I've posted this problem before but I've included some diagnostic info that may help (or amuse). This all worked before the upgrade and I have tried just about everything I can think of. I have an integrated sis5598 on an nlx board which will only run the VGA16 server (though not that well). The Cirrus 5446 pci card had no problems with the XF86_SVGA server before the upgrade. When I try to run it now the monitor flicks off for a second then comes back with colorful scrambled garbage and no key response. I can telnet in from another machine and execute a shutdown but that is the only way I can get the console back. Changing to a lower performance server doesn't help. When I pull the card out and reconfigure (using the sis5598 chip) it works as before. Below is what X spits out before it freaks out followed by dmesg output in case someone can see something that is obviously wrong (because I sure can't). In fact, if you see anything wrong or just plain stupid, please let me know Thanks - Kirk XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.1-STABLE i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic Using syscons driver with X support (version 2.0) (using VT number 8) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: disabled (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/psm0, buttons: 3 (**) Mouse: 3 button emulation (timeout: 50ms) (**) SVGA: Graphics device ID: "Cirrus Logic GD544x" (**) SVGA: Monitor ID: "Dell 17" (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (--) SVGA: PCI: Cirrus Logic GD5446 rev 0, Memory @ 0xe6000000 (--) SVGA: chipset: generic (--) SVGA: videoram: 64k (--) SVGA: clocks: 25.18 (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Using builtin driver modes (--) SVGA: Builtin Mode: 320x200 (--) SVGA: Virtual resolution set to 320x204 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 **dmesg** Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-STABLE #0: Sat Oct 7 09:31:25 AKDT 2000 root@bsd1.alaptech.com:/usr/obj/usr/src/sys/BSD1 Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 267274677 Hz CPU: AMD-K6(tm) 3D processor (267.27-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x580 Stepping = 0 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 67108864 (65536K bytes) avail memory = 62357504 (60896K bytes) Preloaded elf kernel "kernel" at 0xc0300000. VESA: v1.2, 1024k memory, flags:0x0, mode table:0xc02ac994 (1000014) VESA: Cirrus Logic GD-5436/46 VGA md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 5591 ATA33 controller> port 0xd000-0xd00f,0xd400-0xd403,0xd800-0xd807,0xe000-0xe003,0xe400-0xe407 irq 11 at device 1.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb81f mem 0xe3800000-0xe38fffff,0xe7800000-0xe7800fff irq 10 at device 3.0 on pci0 fxp0: Ethernet address 00:e0:18:80:60:e0 pci0: <Cirrus Logic GD5446 SVGA controller> at 18.0 pci0: <SiS 5597/98 SVGA controller> at 19.0 rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0xb000-0xb0ff mem 0xe2800000-0xe28000ff irq 11 at device 20.0 on pci0 rl0: Ethernet address: 00:e0:29:70:43:5d miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pcm0: <Yamaha OPL-SAx> at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x330-0x331,0x370-0x371 irq 5 drq 0,1 on isa0 unknown0: <OPL3-SA3 Sound Board> at port 0x201 on isa0 IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, unlimited logging ad0: 2441MB <WDC AC22500L> [4960/16/63] at ata0-master using UDMA33 Mounting root from ufs:/dev/ad0s1a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001007154404.A366>