Date: Sun, 30 Jan 2000 02:58:04 +0100 From: Boris <talion@easynet.fr> To: freebsd-questions@FreeBSD.ORG Subject: [Kernel Compil Problem] OTTYDISC and NTTYDISC undeclared (first use this function) Message-ID: <4.2.2.20000130024625.00d94d10@mail.easynet.fr>
next in thread | raw e-mail | index | archive | help
Hi, I got a problem during compilation of my kernel on this .c file where the compiler doesn't find the declaration of OTTYDISC and NTTYDISC cc -c -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wuninitialized -Wformat -Wunused -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -DKERNEL -DVM_STACK -include opt_global.h -elf ../../kern/tty_snoop.c ../../kern/tty_snoop.c: In function `snpwrite': ../../kern/tty_snoop.c:102: `OTTYDISC' undeclared (first use this function) ../../kern/tty_snoop.c:102: (Each undeclared identifier is reported only once ../../kern/tty_snoop.c:102: for each function it appears in.) ../../kern/tty_snoop.c:102: `NTTYDISC' undeclared (first use this function) ../../kern/tty_snoop.c: In function `snp_detach': ../../kern/tty_snoop.c:345: `OTTYDISC' undeclared (first use this function) ../../kern/tty_snoop.c:345: `NTTYDISC' undeclared (first use this function) ../../kern/tty_snoop.c: In function `snpioctl': ../../kern/tty_snoop.c:417: `OTTYDISC' undeclared (first use this function) ../../kern/tty_snoop.c:417: `NTTYDISC' undeclared (first use this function) *** Error code 1 ----------- ----------- Here is my kernel - No error after 'config NOYO' command # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.143.2.24 1999/12/05 01:56:42 luoqi Exp $ machine "i386" cpu "I586_CPU" ident NOYO maxusers 48 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options "EXT2FS" options PROCFS #Process filesystem options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options QUOTA config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 # PnP support for ISA controller pci0 # Floppy drives controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 # IDE controller and disks options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 # ATAPI devices options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 # NCR/Symbios Logic #controller ahb0 # EISA AHA1742 family #controller ahc0 # AHA2940 and onboard AIC7xxx devices #controller amd0 # AMD 53C974 (Teckram DC-390(T)) #controller isp0 # Qlogic family #controller dpt0 # DPT Smartcache - See LINT for options! #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #"controller aic0 at isa? port ? cam irq ? # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. #controller scbus0 # SCSI bus (required) #device da0 # Direct Access (disks) #device sa0 # Sequential Access (tape etc) #device cd0 # CD #device pass0 # Passthrough device (direct SCSI) # Proprietary or custom CD-ROM Interfaces #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #device matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at isa? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? # Serial (COM) ports device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 # Parallel port bus (required) device lpt0 at ppbus? # Printer device plip0 at ppbus? # TCP/IP over parallel device ppi0 at ppbus? # Parallel port interface device #controller vpo0 at ppbus? # Requires scbus and da0 # PCI Ethernet NICs. device de0 # DEC/Intel DC21x4x (``Tulip'') # ISA Ethernet NICs. # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? port? net irq ? # PCCARD NIC drivers. # ze and zp take over the pcic and cannot coexist with generic pccard # support, nor the ed and ep drivers they replace. # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun 1 # Packet tunnel pseudo-device pty 32 # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 2 #Berkeley packet filter pseudo-device snp 4 pseudo-device ccd 2 options USERCONFIG device pcm0 at isa? port? tty irq 5 drq 1 flags 0x15 -------------- Waiting for your advice :-) Best Regards, Boris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.2.20000130024625.00d94d10>