From owner-freebsd-questions Sat Aug 26 8:34:32 2000 Delivered-To: freebsd-questions@freebsd.org Received: from unix.megared.net.mx (megamail.megared.com.mx [200.52.207.52]) by hub.freebsd.org (Postfix) with ESMTP id D77CB37B43C for ; Sat, 26 Aug 2000 08:34:14 -0700 (PDT) Received: from ales (ales.corp.megared.net.mx [200.52.193.2]) by unix.megared.net.mx (8.9.3/8.9.3) with SMTP id KAA70955; Sat, 26 Aug 2000 10:33:20 -0500 (CDT) (envelope-from ales@megacable.com.mx) Message-ID: <012601c00f72$f8d0dd60$02c134c8@megared.net.mx> From: "Alejandro Ramirez" To: "Soren Schmidt" Cc: References: <200008251847.UAA84831@freebsd.dk> Subject: Re: ATA driver panics in Sysinstall with IBM Netfinity 5000 Servers !!! Date: Sat, 26 Aug 2000 10:33:23 -0500 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Soren, Thanks for helping me with this, below you will find the verbose output. > > I have two IBM Netfinity 5000 Dual PIII 600Mhz servers that wanted to > > install FreeBSD 4.1-RELEASE on them, when I booted from the cdrom to start > > the installation, the cdrom probe failed, it gave me the following errors: > > > > atapci0: port > > 0xffa0-0xffaf,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 irq 14 at device 15.1 on > > pci0 > > ata0: at 0x1f0 irq 14 on atapci0 > > All those adresses from the std ATA controller has me somewhat worried, > could you do a verbose boot and mail me the output.... Ok, here its the boot -v output using kernel.GENERIC: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-RELEASE #0: Fri Jul 28 14:30:31 GMT 2000 jkh@ref4.freebsd.org:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... TSC clock: 598289363 Hz, i8254 clock: 1192959 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (598.41-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383fbff real memory = 671072256 (655344K bytes) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x00426000 - 0x27ff3fff, 666689536 bytes (162766 pages) avail memory = 647876608 (632692K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fd5d0 bios32: Entry = 0xfd5e1 (c00fd5e1) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xd61c pnpbios: Found PnP BIOS data at 0xc00fde90 pnpbios: Entry = f0000:498c Rev = 1.0 Other BIOS signatures found: ACPI: 000fdec0 Preloaded elf kernel "kernel.GENERIC" at 0xc040d000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x00000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166) npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166) pcib0: on motherboard found-> vendor=0x1166, dev=0x0007, revid=0x04 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 00000000, size 0 found-> vendor=0x1166, dev=0x0005, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x9004, dev=0x7895, revid=0x04 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 00002000, size 8 map[14]: type 1, range 32, base febff000, size 12 found-> vendor=0x9004, dev=0x7895, revid=0x04 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=15 map[10]: type 1, range 32, base 00002200, size 8 map[14]: type 1, range 32, base febfe000, size 12 found-> vendor=0x1022, dev=0x2000, revid=0x36 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 00002180, size 5 map[14]: type 1, range 32, base febfdc00, size 5 found-> vendor=0x5333, dev=0x8901, revid=0x16 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base f8000000, size 26 found-> vendor=0x1166, dev=0x0200, revid=0x4d class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0210, revid=0x4a class=01-01-ea, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=14 map[10]: type 1, range 32, base 000001f0, size 3 map[14]: type 1, range 32, base 000003f4, size 2 map[18]: type 1, range 32, base 00000000, size 3 map[1c]: type 1, range 32, base 00000000, size 2 map[20]: type 1, range 32, base 0000ffa0, size 4 found-> vendor=0x1166, dev=0x0220, revid=0x04 class=0c-03-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base ff700000, size 12 pci0: on pcib0 ahc0: port 0x2000-0x20ff mem 0xfebff000-0xfebfffff irq 11 at device 6.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: Low byte termination Enabled ahc0: High byte termination Enabled ahc0: aic7895 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc0: Downloading Sequencer Program... 389 instructions downloaded ahc1: port 0x2200-0x22ff mem 0xfebfe000-0xfebfefff irq 15 at device 6.1 on pci0 ahc1: Reading SEEPROM...done. ahc1: Low byte termination Enabled ahc1: High byte termination Enabled ahc1: aic7895 Wide Channel B, SCSI Id=7, 16/255 SCBs ahc1: Downloading Sequencer Program... 389 instructions downloaded lnc0: port 0x2180-0x219f mem 0xfebfdc00-0xfebfdc1f irq 10 at device 9.0 on pci0 bpf: lnc0 attached lnc0: PCnet-FAST+ address 00:06:29:50:fe:37 lnc0: driver is using old-style compatability shims pci0: (vendor=0x5333, dev=0x8901) at 10.0 irq 9 isab0: at device 15.0 on pci0 isa0: on isab0 atapci0: port 0xffa0-0xffaf,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 irq 14 at device 15.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=00 status1=00 ata0: devices = 0x4 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed ohci0: mem 0xff700000-0xff700fff irq 10 at device 15.2 on pci0 ohci0: (New OHCI DeviceId=0x02201166) using shared irq10. usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166) pcib1: on motherboard pci1: on pcib1 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number lnc-: lnc0 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata3: mask=00 status0=ff status1=ff ata3: probe allocation failed bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 bpf: lp0 attached isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 3:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: ppp0 attached new masks: bio 684440, tty 63009a, net 67049a bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: faith0 attached ata0-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata0-master: success setting up PIO4 mode on generic chip (null): MODE_SENSE_BIG command timeout - resetting ata0: resetting devices .. ata0: mask=01 status0=00 status1=00 done (null): read data overrun 28/2 acd0: CDROM drive at ata0 as master acd0: read 500KB/s (10517KB/s), 1792KB buffer, PIO4 acd0: Reads: CD-RW acd0: Mechanism: caddy acd0: Medium: CD-ROM 120mm audio disc loaded Waiting 15 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. Sending WDTR! ahc1: target 0 using 16bit transfers ahc1: target 0 synchronous at 20.0MHz, offset = 0x8 Sending SDTR! Sending WDTR! ahc1: target 1 using 16bit transfers ahc1: target 1 synchronous at 20.0MHz, offset = 0x8 Sending SDTR! Sending WDTR! ahc1: target 2 using 16bit transfers ahc1: target 2 synchronous at 20.0MHz, offset = 0x8 Sending SDTR! Sending WDTR! ahc1: target 3 using 16bit transfers ahc1: target 3 synchronous at 20.0MHz, offset = 0x8 Sending SDTR! ahc1: target 6 synchronous at 5.0MHz, offset = 0xf ahc1: target 3 using asynchronous transfers ahc1: target 3 synchronous at 20.0MHz, offset = 0x8 ahc1: target 2 using asynchronous transfers ahc1: target 2 synchronous at 20.0MHz, offset = 0x8 ahc1: target 1 using asynchronous transfers ahc1: target 1 synchronous at 20.0MHz, offset = 0x8 ahc1: target 0 using asynchronous transfers ahc1: target 0 synchronous at 20.0MHz, offset = 0x8 ahc1: target 3 synchronous at 5.7MHz, offset = 0x8 ahc1: target 2 synchronous at 5.7MHz, offset = 0x8 ahc1: target 1 synchronous at 5.7MHz, offset = 0x8 ahc1: target 0 synchronous at 5.7MHz, offset = 0x8 Creating DISK da0 Creating DISK da1 Creating DISK da2 Creating DISK da3 sa0 at ahc1 bus 0 target 6 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: Serial Number GS0DBGP sa0: 5.000MB/s transfers (5.000MHz, offset 15) pass0 at ahc1 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number LS5836340000W01609SA pass0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at ahc1 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-2 device pass1: Serial Number LSB0590200001029197C pass1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass2 at ahc1 bus 0 target 2 lun 0 pass2: Fixed Direct Access SCSI-2 device pass2: Serial Number LSB6902000001031H332 pass2: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass3 at ahc1 bus 0 target 3 lun 0 pass3: Fixed Direct Access SCSI-2 device pass3: Serial Number LSB64726000010311GY5 pass3: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass4 at ahc1 bus 0 target 6 lun 0 pass4: Removable Sequential Access SCSI-2 device pass4: Serial Number GS0DBGP pass4: 5.000MB/s transfers (5.000MHz, offset 15) pass5 at ahc1 bus 0 target 14 lun 0 pass5: Fixed Processor SCSI-2 device pass5: Serial Number 1 pass5: 3.300MB/s transfers pass5 at ahc1 bus 0 target 14 lun 0 pass5: Fixed Processor SCSI-2 device pass5: Serial Number 1 pass5: 3.300MB/s transfers da0 at ahc1 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number LS5836340000W01609SA da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C) da1 at ahc1 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number LSB0590200001029197C da1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C) da2 at ahc1 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-2 device da2: Serial Number LSB6902000001031H332 da2: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C) da3 at ahc1 bus 0 target 3 lun 0 da3: Fixed Direct Access SCSI-2 device da3: Serial Number LSB64726000010311GY5 da3: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da3: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C) Mounting root from ufs:/dev/da0s1a da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK start_init: trying /sbin/init vinum: loaded da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da1s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da1s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da1s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da1s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da2s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da2s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da2s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da2s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da3s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da3s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da3s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK da3s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic md0: invalid primary partition table: no magic vinum: reading configuration from /dev/da3s1e vinum: updating configuration from /dev/da2s1e vinum: updating configuration from /dev/da1s1e da0s1: type 0xa5, start 0, end = 17774159, size 17774160 : OK P.S. If there is anything I can help, root access, serial access, testing patches, etc, just tell me. Thanks Ales To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message