From owner-freebsd-questions Thu Nov 2 21:23:25 2000 Delivered-To: freebsd-questions@freebsd.org Received: from mufasa.olivet.edu (onuvpn.olivet.edu [12.21.76.8]) by hub.freebsd.org (Postfix) with ESMTP id E355A37B479 for ; Thu, 2 Nov 2000 21:23:20 -0800 (PST) Received: from webaccess.olivet.edu (webmail.olivet.edu [192.168.0.4]) by mufasa.olivet.edu (8.11.0/8.9.3) with SMTP id eA35VrA27093 for ; Thu, 2 Nov 2000 23:31:53 -0600 Received: from olivet.edu (student-10-163.olivet.edu [172.17.10.163]) by webaccess.olivet.edu; Thu, 02 Nov 2000 23:23:11 -0600 Message-ID: <3A024C52.50ACFE11@olivet.edu> Date: Thu, 02 Nov 2000 23:25:38 -0600 From: James Stephenson X-Mailer: Mozilla 4.75 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Problem with Network Card During Install... References: <3A0229F5.2B76DB85@olivet.edu> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I found the dipswitch and jumper diagrams for my network card, finally, from ftp.microdyne.com. I am able to set it to whatever I need. However, I do not know which driver to use in the kernel config before install. Again, I have a Gateway Communications, Inc. ISA G/Ethertwist PC card with UTP and AUI (model 82200023-03). I am not sure if this is NE2000 compatible or not. I have attempted, several times, to load the kernel with the NE2000 driver supplied, but after it checks my ppbus (which is at the time it would detect my network card), it hangs. Does this mean I am using the correct driver, and that I need to change address and irq settings to coincide with the system (I am making sure there are no conflicts...), or does this mean that I have the wrong driver? I use other drivers and they do not detect it and just go straight into the install. I am quickly getting frustrated with this, and would like any and all help that I could get, please. If anyone has had a similar problem, please let me know what you did to resolve it (if possible). Thanks. James James Stephenson wrote: > > The card has an AT&T T 7220 PC chip on it. Basically what I'm asking for is the > driver I need to use and what IRQ and address settings I need to use with it, as > I am exhausted just guessing by trial and error. > > I have checked many search engines, but have not found this specific card just > yet. > > Thanks. > James > > Siegbert Baude wrote: > > > > Hi James, > > > > > The card is an ISA Gateway Communications, Inc. G/Ethertwist > > > PC with AUI, UTP, and BNC (jumpers set to UTP operation). > > > > The relevant part of the card is the chipset it uses. So have a look and > > tell us the name you will find on it. > > > > Also you can feed some search engine with the name of your card, to look, > > if you will find some description of the jumpers. With ISA you have to > > avoid both IRQ and address conflicts, so this is really important to setup > > correctly. > > > > Ciao > > Siegbert To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message