Date: Mon, 27 Feb 2006 13:19:50 -0500 From: Ed Maste <emaste@phaedrus.sandvine.ca> To: Vivek Khera <vivek@khera.org> Cc: stable@freebsd.org Subject: Re: RELENG_6: serial console drops back from 115200 to 9600 baud Message-ID: <20060227181950.GB63750@sandvine.com> In-Reply-To: <4316577A-FF97-4929-B911-85A0009ADCC2@khera.org> References: <4400D235.9030807@andric.com> <20060225225621.GA42888@sandvine.com> <4400E70F.2020902@andric.com> <20060226005712.GA48900@sandvine.com> <44010644.4000504@andric.com> <20060226021457.GB55658@sandvine.com> <4316577A-FF97-4929-B911-85A0009ADCC2@khera.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Feb 27, 2006 at 11:07:35AM -0500, Vivek Khera wrote:
> I get a 9600 baud console with the following after upgrade from 5.4:
This is what I'm planning on putting in UPDATING:
The i386 loader(8) now defaults to the serial speed set by the
previous boot stage, if the comconsole is already in use. If
you've changed BOOT_COMCONSOLE_SPEED in make.conf(5) and
installed a new loader, but have not rebuilt and reinstalled the
boot blocks, then your loader will leave the console at 9600
baud. You may either set comconsole_speed in loader.conf(5), or
reinstall new boot blocks as described in boot(8).
-ed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060227181950.GB63750>