Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 6 May 2002 18:25:46 +0930
From:      "Martin Minkus" <diskiller@diskiller.net>
To:        "'Terry Lambert'" <tlambert2@mindspring.com>
Cc:        <freebsd-net@freebsd.org>, <freebsd-hackers@freebsd.org>
Subject:   RE: 802.11: WaveLAN/Orinoco Cards
Message-ID:  <005b01c1f4db$e3563f20$0200000a@bender>
In-Reply-To: <3CD643F6.33680AA3@mindspring.com>

next in thread | previous in thread | raw e-mail | index | archive | help
But it's a standard WaveLAN/Orinico card, which is what the wi driver is
intended for?

I never had to worry about any of this when I had the old white/bronze
2mbit wavelan cards, but with silver and gold cards, its been nothing
but fun and games....


-----Original Message-----
From: Terry Lambert [mailto:tlambert2@mindspring.com] 
Sent: Monday, 6 May 2002 18:21
To: Martin Minkus
Cc: freebsd-network@freebsd.org; freebsd-hackers@freebsd.org
Subject: Re: 802.11: WaveLAN/Orinoco Cards


Martin Minkus wrote:
> 
>    Part 1.1    Type: Plain Text (text/plain)
>            Encoding: 7bit

[ ... data rate controls on the ifconfig or wicontrol command
      lines tend to result in unexpexted -- frequently 11Mbit
      rather than lower -- measured speeds ... ]

I guess you will have to "suffer" with higher than expected data rates?
8-) 8-).

Actually, I think it's because the card you are using has a different
set of mappings than the firmware for which the commands were intended,
and the driver you are using (wi0) "happens" to work with the card,
despite the different firmware. but the "magic" features don't.

-- Terry


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?005b01c1f4db$e3563f20$0200000a>