Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 15 Oct 2002 11:52:23 +0200 (CEST)
From:      KLIMA <root@klima.physik.uni-mainz.de>
To:        freebsd-questions@freebsd.org
Cc:        freebsd-hardware@freebsd.org
Subject:   FreeBSD 4.7-R: sa/tape driver: not known kernel log of tape driver
Message-ID:  <20021015114629.P71977-100000@klima.physik.uni-mainz.de>

next in thread | raw e-mail | index | archive | help

Hello.

Can anyone please explain what this kernel log menas:

sym0:4:control msgout: 80 6.

The SCSI ID is a HP DAT 40 external drive and the backup system is
afbackup 3.3.7pl3 under FreeBSD 4.7-R.

this is dmesg out:

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #4: Sat Oct 12 15:15:51 CEST 2002
    root@klima.physik.uni-mainz.de:/usr/obj/usr/src/sys/KLIMA
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (803.60-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 1073725440 (1048560K bytes)
avail memory = 1041154048 (1016752K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  3, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03c2000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00f12d0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 16 -> irq 10
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
pci0: <VIA 85C586 ATA controller> at 4.1
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4
sym0: <1010-33> port 0xb800-0xb8ff mem 0xf5800000-0xf5801fff,0xf6000000-0xf60003ff irq 2 at device 9.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <1010-33> port 0xb400-0xb4ff mem 0xf4800000-0xf4801fff,0xf5000000-0xf50003ff irq 10 at device 9.1 on pci0
sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
pcib3: <DEC 21154 PCI-PCI bridge> at device 11.0 on pci0
IOAPIC #0 intpin 18 -> irq 11
pci2: <PCI bus> on pcib3
pcib4: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci2
IOAPIC #0 intpin 17 -> irq 13
pci3: <PCI bus> on pcib4
amr0: <AMI MegaRAID> mem 0xf8000000-0xf9ffffff irq 13 at device 0.0 on pci3
amr0: <MegaRAID Elite 1600> Firmware C170, BIOS 3.13, 32MB RAM
pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x9800-0x983f mem 0xf3000000-0xf30fffff,0xf3800000-0xf3800fff irq 10 at device 12.0 on pci0
fxp0: Ethernet address 00:d0:b7:06:6e:78
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <8 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
DUMMYNET initialized (011031)
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
IPsec: Initialized Security Association Processing.
Waiting 4 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
amrd0: <MegaRAID logical drive> on amr0
amrd0: 43735MB (89569280 sectors) RAID 5 (optimal)
SMP: AP CPU #1 Launched!
sa0 at sym0 bus 0 target 4 lun 0
sa0: <HP C5683A C005> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
Mounting root from ufs:/dev/amrd0s1a
cd0 at sym1 bus 0 target 3 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
fxp0: Microcode loaded, int_delay: 1000 usec  bundle_max: 6
link_elf: symbol splash_register undefined
sym0:4:control msgout: 80 6.
sym0:4:control msgout: 80 6.
 klima proftpd[5292]: no modules loaded for `ftpd' service
sym0:4:control msgout: 80 6.
sym0:4:control msgout: 80 6.
sym0:4:control msgout: 80 6.
sym0:4:control msgout: 80 6.
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
sym0:4:control msgout: 80 6.
sym0:4:control msgout: 80 6.
sym0:4:control msgout: 80 6.
sym0:4:control msgout: 80 6.
 klima proftpd[63760]: no modules loaded for `ftpd' service
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet


-------------------------------------------------------------------
O. Hartmann

i.A. Systemadministration Klimadatenserver
am IPA, Universitaet Mainz (IPAMZLX)


Johannes Gutenberg Universitaet
Institut fuer Physik der Atmosphaere
Becherweg 21
55099 Mainz

ohartman@ipamzlx.physik.uni-mainz.de
harto000@mail.uni-mainz.de


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021015114629.P71977-100000>