From owner-freebsd-scsi Mon Nov 27 10:58:49 2000 Delivered-To: freebsd-scsi@freebsd.org Received: from post.it.helsinki.fi (post.it.helsinki.fi [128.214.205.24]) by hub.freebsd.org (Postfix) with ESMTP id 9298637B479 for ; Mon, 27 Nov 2000 10:58:46 -0800 (PST) Received: from mursu.pesa.fi (root@sirppi.helsinki.fi [128.214.205.27]) by post.it.helsinki.fi (8.11.1/8.11.0-SPAMmers-sod-off) with ESMTP id eARIwho27853; Mon, 27 Nov 2000 20:58:43 +0200 (EET) Received: (from poku@localhost) by mursu.pesa.fi (8.11.1/8.11.1) id eARIWIG11005; Mon, 27 Nov 2000 20:32:18 +0200 (EET) (envelope-from poku@mursu.pesa.fi) To: Andrea Venturoli Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: Zip Zoom References: <200011251425.eAPEPmi24483@relay.flashnet.it> From: Jussi Reissell Date: 27 Nov 2000 20:32:18 +0200 In-Reply-To: Andrea Venturoli's message of "Sat, 25 Nov 2000 16:25:40 EST" Message-ID: <87y9y51d1p.fsf@mursu.pesa.fi> Lines: 53 User-Agent: Gnus/5.0803 (Gnus v5.8.3) Emacs/20.7 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Andrea Venturoli writes: Did an wild, indiscriminating fill on your msg. Some lines may appear strange as a result. > Hello. > > I've got a problem with a FreeBSD 4.1.1-RELEASE system (although I > also tried 4.0-R, which behaves just the same. The machine is an IBM > PS VP with a 486DX2, 20MB of RAM, ISA bus, an IDE HD, a 3Com > EtherLink III, a modem and an Elsa QuickStep 1000pro ISDN card. Now > I had a spare SCSI HD along with a Zip Zoom SCSI adapter (which is > actually an Adaptec AVA-1502): ok, it can't boot, it will probably > be very slow, but it's fine for what I have to do. I plugged in the > adapter and connected the Disk (with another OS it works fine, so I > don't think it's an hardware problem). I configured my kernel with > the following lines (but it's the same with the generic kernel): > > > device aic0 at isa? device scbus device da > > > Then I rebooted, but I got the following: > > > Waiting 15 seconds for SCSI devices to settle (probe0:aic0:0:0:0) > > ccb 0xc04dbc00 - timed out, phase 0xb6, state 4 > > (probe0:aic0:0:0:0) ccb 0xc04dbc00 - timed out, phase 0xb6, state > > 4 (probe0:aic0:0:0:0) ccb 0xc04dbc00 - timed out, phase 0xb6, > > state 1 (probe0:aic0:0:0:0) ccb 0xc04dbc00 - timed out, phase > > 0xb6, state 1 ... > > After the first line, the others appear very slowly (even one per > minute); every device is probed a few times times up to device 7 > (it's a narrow bus), sometimes the number after "ccb" changes. > > I tried every IRQ the card could handle (i.e. from 9 to 12), the > kernel will always default to 12, so I "userconfig"ured it in the > other cases; I also tried using the "alternate" jumper which moves > the card from i/o ports 0x140 to 0x340, and here the kernel is smart > enough to detect it. Anyway I could not get it to work. I > double-checked and I should have no IRQ conflicts, since from 9 to > 12 there is no legacy card, only the two plug and play ones, which > get whichever ones are free. > > Any hint/suggestion? Not really. The aic driver seems to have problems if there's a Zip drive plugged in. There's a pending pr: http://www.FreeBSD.org/cgi/query-pr.cgi?pr=22733 I've stumbled on the same problem with an adaptec pccard which uses the same driver. jussi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message