Date: Fri, 25 Apr 2003 11:31:01 +0200 From: Antoine Jacoutot <ajacoutot@lphp.org> To: freebsd-questions@freebsd.org Subject: firewall pppoe and outside interface Message-ID: <200304251131.01187.ajacoutot@lphp.org>
next in thread | raw e-mail | index | archive | help
Hi !
I have a little question. I am actually trying to configure a FreeBSD firewall
(...still learning). I am connected to DSL with pppoe and I can't decide
which is my outside interface.
Right now, everything is open and nat is working on the tun0 interface (the
pppoe interface).
Here is the output of ifconfig:
ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 52:54:00:e2:77:35
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:50:ba:1e:33:e0
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
inet xxx.xxx.xxx.xxx --> xxx.xxx.xxx.xxx netmask 0xffffffff
Opened by PID 15147
The DSL modem is plugged into ed0 (which does not have @ip since it's pppoe,
it doesn't need one). So should I considere my outside interface as tun0 or
ed0 ? The natd interface is tun0, that I know.
Thanks for any hints.
Antoine
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200304251131.01187.ajacoutot>