Date: Sat, 24 May 2003 17:58:57 +0200 From: Martin Schut <mschut@wxs.nl> To: freebsd-questions@freebsd.org Subject: cdrom rejects and ejects Message-ID: <002201c3220d$656dcdc0$0301a8c0@mshome>
next in thread | raw e-mail | index | archive | help
Amice,
Can someone help me with the following.
After installing a new BIOS (v 8.0) on my Toshiba Satellite Pro 490XCDT
laptop and FreeBSD 4.9 Stable, I am fighting with my CDRom.
De thing rejects and ejects CD's other than the installation CD.
When trying to play an audio CD in Gnome 2 with XMMS it succeeds the
first time and after changing the CD it doesn't accepts the new CD.
It doesn't accepts CD's at all with MP3 files (data) on it. I didn't
encountered problem before with FBSD 4.5 and Gnome 1.4 on the laptop.
I already tried to change the BIOS settings and disabled amd.
When I try to mount CD's in Root I receive an Input / Output error.
Below you'll find a copy of my dmesg log. Please note the ata1 slave
message!
Thanks in advance for your help!
Martin Schut
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.8-RELEASE #2: Sun May 18 21:26:15 CEST 2003
root@BSDMobiel.HOME:/usr/obj/usr/src/sys/CUSTOM
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x650 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,MMX,FXSR>
real memory = 67043328 (65472K bytes)
avail memory = 59682816 (58284K bytes)
Preloaded elf kernel "kernel" at 0xc0574000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00f72f0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <S3 ViRGE MX graphics accelerator> at 3.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq
11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip0: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at
device 5.3 on pci0
chip1: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at
device 9.0 on pci0
pcic0: <Toshiba ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.0 on
pci0
pcic0: PCI Memory allocated: 0x88000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcic1: <Toshiba ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.1 on
pci0
pcic1: PCI Memory allocated: 0x88001000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xe8000-0xebfff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcm0: <OPL3-SAx (YMF719)> at port
0x530-0x537,0x538-0x539,0xf8c-0xf94,0xe0e irq 5 drq 1 flags 0xc115 on
isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata1-slave: ATAPI identify retries exceeded
<<<l--------------
pccard: card inserted, slot 0
ad0: 3909MB <TOSHIBA MK4006MAV> [7944/16/63] at ata0-master UDMA33
acd0: CDROM <CD-220EA> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
pccard: card removed, slot 0
pccard: card inserted, slot 0
xe0 at port 0x240-0x247 iomem 0xd1000-0xd1fff irq 11 slot 0 on pccard0
xe0: Xircom CE2, bonding version 0x40
xe0: Ethernet address 00:80:c7:f1:7b:8a
module_register: module pccard/xe already exists!
linker_file_sysinit "if_xe.ko" failed to register! 17
xe0: watchdog timeout; resetting card
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002201c3220d$656dcdc0$0301a8c0>