Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 1 Nov 2003 21:43:26 +0100
From:      Toni Schmidbauer <>
To:        "Alexander P. Goldhammer" <>
Subject:   Re: Mounting USB drives and PCI USB and ieee1394 drives
Message-ID:  <>
In-Reply-To: <000101c3a0b1$5e58f690$6501a8c0@Goldhammer>
References:  <000101c3a0b1$5e58f690$6501a8c0@Goldhammer>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help

Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Sat, Nov 01, 2003 at 02:50:13PM -0500, Alexander P. Goldhammer wrote:

i am really no scsi, usb, firewire specialist but i think for
some of your questions i can give an answer :-)

> (da0:umass-sim0:0:0:0): Read(6)/write(6) not supported, increasing the
> minimum_cmd_size to 10.

this is normal. 4.8 first tried 6 byte scsi commands. as the
messages says, for this device 10 byte scsi commands are required.
the default changed in 4.9 from 6 to 10 bytes for usb devices.

> #umass0: at hub0 port 1 (addr 2) disconnected
> (da0:umass-sim0:0:0): lost device
> (da0:umass-sim0:0:0): removing device entry
> umass0: detached
> My intuition tells me this is not good.

you should stop the drive before removing it (camcontrol stop
0:0:0). see camcontrol(8).

> (da0:umass-sim0:0:0:0): got CAM status 0x4
> (da0:umass-sim0:0:0:0): fatal error, failed to attach to device
> (da0:umass-sim0:0:0:0): lost device
> (da0:umass-sim0:0:0:0): removing device entry
> Does anyone have any ideas on how to address this/fix this?

when you stop the device (camcontrol), then remove it,
reattaching should work.

> b) If/when I plug it a USB/Firewire drive into this card how is the
> "device name" specified?  Or is there a command to figure this out?=20

man 8 camcontrol

> c) Is msdos the correct "filesystem" designation?

if you share your data between windows and freebsd msdosfs is the
right fs. but be aware i had problems with huge partitions
and msdosfs see:

Kann man etwas nicht verstehen, dann urteile man | toni at stderror dot at=
lieber gar nicht, als dass man verurteile.       | Toni Schmidbauer
-- Rudolf Steiner                                |=20

Content-Type: application/pgp-signature
Content-Disposition: inline

Version: GnuPG v1.2.3 (FreeBSD)



Want to link to this message? Use this URL: <>