Date: Tue, 14 Mar 2006 00:38:58 -0500 From: Mike Tancsa <mike@sentex.net> To: freebsd-stable@freebsd.org Subject: Re: ata panic Message-ID: <6.2.3.4.0.20060314002825.069fad38@64.7.153.2> In-Reply-To: <6.2.3.4.0.20060313232855.107fa680@64.7.153.2> References: <6.2.3.4.0.20060313232855.107fa680@64.7.153.2>
next in thread | previous in thread | raw e-mail | index | archive | help
At 11:38 PM 13/03/2006, Mike Tancsa wrote:
>Hi,
>I was trying out a recent RELENG_6 on a VIA mini ITX board with
>built in CF reader. If a CF is present, the box panics at boot
>(tried with 2 separate boards and different CFs just in case it was
>hardware). This is with a RELENG_6 from March 7th
>
>
>with the flash in I get a panic at bootup.
Just updated the source to the latest RELENG_6 in case the changes
fixed it, but no dice
GEOM: new disk ad0
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire
ad2: setting PIO4 on 8237 chip
ad2: 244MB <SanDisk SDCFB-256 Rev 0.00> at ata1-master PIO4
Fatal trap 18: integer divide fault while in kernel mode
instruction pointer = 0x20:0xc069c01b
stack pointer = 0x28:0xc0c20b78
frame pointer = 0x28:0xc0c20c14
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 18
panic: integer divide fault
KDB: stack backtrace:
panic(c06caf91,c06f370c,0,0,fffff) at 0xc0512343 = panic+0x103
trap_fatal(0,0,0,0,c07359a0) at 0xc0693485 = trap_fatal+0x225
trap(8,28,28,1,0) at 0xc06939b7 = trap+0x20f
calltrap() at 0xc0682b6a = calltrap+0x5
--- trap 0x12, eip = 0xc069c01b, esp = 0xc0c20b78, ebp = 0xc0c20c14 ---
__qdivrem(7a2b0,0,0,0,0) at 0xc069c01b = __qdivrem+0x3b
__udivdi3(7a2b0,0,0,0) at 0xc069c4c2 = __udivdi3+0x16
ad_attach(c3199400,c3199400,c32a5000,0,c0c20d24) at 0xc046870b =
ad_attach+0x44f
device_attach(c3199400) at 0xc05270ae = device_attach+0x1be
bus_generic_attach(c3228380,c3228380,ffffffff,2,c3199400) at
0xc0527cc6 = bus_generic_attach+0x12
ata_identify(c3228380,0,c0c20d6c,c0524120,0) at 0xc04592c9 = ata_identify+0xcd
ata_boot_attach(0,c0722c90,c0c20d88,c04e37f7,0) at 0xc0459441 =
ata_boot_attach+0x4d
run_interrupt_driven_config_hooks(0,c31459f0,c1ec00,c1e000,c25000) at
0xc0524120 = run_interrupt_driven_config_hooks+0x1c
mi_startup() at 0xc04e37f7 = mi_startup+0xb3
begin() at 0xc0434095 = begin+0x2c
Uptime: 3s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20060314002825.069fad38>