Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 3 May 1995 22:51:26 -0400 (EDT)
From:      Samy Touati <lmcsato@LMC.Ericsson.SE>
To:        questions@FreeBSD.org
Cc:        Samy Touati <lmcsato@noah.lmc.ericsson.se>
Subject:   SLIP connection on 2.0 SNAP 120495
Message-ID:  <Pine.SUN.3.90.950503224229.2119A-100000@lmcpub>

Next in thread | Raw E-Mail | Index | Archive | Help
Hi,


I suppose this question has been asked many times here.
I'm experiencing some problems connecting to a xyplex via SLIP.
I'm able to connect to it to start slip from the xyplex side and to start 
it from my side. Everything is fine and when I do a telnet or a ping
I see the modem sending data, and receiveing small amount of bytes but 
nothing happens and all my pakets are lost.

I did:

>> Connect to xyplex
>> ifconfig sl0 inet myaddr xyplex_addr mtu 296 netmask 255.255.255.255
>> route add default xyplex_addr
>> Start slip on xyplex side
>> slattach -s 38400 -h cuaa1

telnet ping don't get to any host.
No errors are reported except a timeout on telnet.
slstat shows that packets are sent but only bytes (in column) are 
received and no errors or collisions occur.

netstat shows a referenced interface and shows some numbers in the use 
column.

I tried different combinations of mtu, slip cslip different netmask but 
it's always the same result.
I also disabled the T/TCP feature from my system.
Anyone has a clue of what is happening?


Thanks.

Samy
lmcsato@lmc.ericsson.se






Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?Pine.SUN.3.90.950503224229.2119A-100000>